Crestron qm-iem Manuale Utente
Crestron QM-IEM
Image Enhancer Module
Industry Compliance
As of the date of manufacture, the QM-IEM has been tested and found to
comply with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling (N11785).
comply with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling (N11785).
NOTE: This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Installation
The QM-IEM may be installed at the output of the QM-RMCRX or at the
input of the DLP display device.
input of the DLP display device.
QM-RMCRX
QM-IEM
Connect Male End to
RGBHV Output
RGBHV Output
Connect Female End to
DLP Display Device Input
DLP Display Device Input
Use a small flat-blade screwdriver to secure the QM-IEM to the QM-
RMCRX RGBHV output port and connect the female end to the DLP
Display device.
RMCRX RGBHV output port and connect the female end to the DLP
Display device.
Installation Guide - DOC. 6270
Image Enhancer Module: QM-IEM
• 3