eutech-instruments waterproof cyberscan con 400410 & tds 400 conductivitytds meter Manuale Utente
Instruction Manual
CON 400/410
- 20 -
5.5 HOLD
Function
This feature lets you freeze the display for a
delayed observation. HOLD can be used any time
in MEAS mode.
1. To hold a measurement, press the HOLD
key while in measurement mode. “HOLD” will
appear on the display.
2.
To release the held value, press the HOLD
again. Continue to take measurements.
NOTE:
•
This meter shuts off automatically after 20 minutes of nonuse (without key press).
•
If the meter is shut off either automatically or manually, the HOLD value will be lost.
For longer storage, use the memory functions (see pages 21-22).
•
Your meter has an auto endpoint feature. When this feature is switched on, and
when a reading is stable for more than 5 seconds, the display will automatically
“HOLD” the reading. The “HOLD” indicator appears. Press the HOLD key to release
the reading. To switch on or off the auto endpoint feature, see SETUP program P4.1
on page 30.
Figure 13 - HOLD function