Ideal nd2365 Manuale Utente

This meter is warranted to the original purchaser against
defects in material or workmanship for the lifetime of the meter.
During this warranty period, IDEAL INDUSTRIES, INC. will, at
its option, replace or repair the defective unit, subject to 
verification of the defect or malfunction.

This warranty does not apply to defects resulting from abuse,
neglect, accident, unauthorized repair, alteration, or 
unreasonable use of the instrument.

Any implied warranties arising out of the sale of an IDEAL
product, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, are limited
to the above.  The manufacturer shall not be liable for loss of
use of the instrument or other incidental or consequential 
damages, expenses, or economic loss, or for any claim or
claims for such damage, expenses or economic loss.

State laws vary, so the above limitations or exclusions may not
apply to you.  This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.

Battery Installation or Replacement:
The #61-480 is powered by one 9V battery.  
1.  Remove the test leads from the front terminals and turn the 

meter off.

2.  Remove the screw from the battery cover and lift to remove.
3.  Lift battery box and replace batteries.
4.  Make sure the battery box leads do not become pinched 

between the case and battery cover before replacing the 
battery cover and screw.

Fuse Replacement
1.  Remove the test leads from the front terminals and turn the 

meter off.

2.  Remove the screw from the battery cover and lift to remove.
3.  Remove the screws from the bottom case and the inside of 

the battery cover and lift the case bottom until it unsnaps 
from the case top.

4.  Remove the defective fuse by gently prying one end of the 

fuse loose and sliding the fuse out of the fuse holder.

5.  Install a new fuse of the same size and rating.  Make sure it 

is centered in the fuse holder.

6.  Make sure the battery box leads do not become pinched 

between the case and battery cover before replacing the 
bottom case and battery cover.

IDEAL INDUSTRIES, INC.
Sycamore, IL 60178, U.S.A.
800-304-3578 Customer Assistance
www.testersandmeters.com 
ND 2365-1 

Made in Taiwan

To avoid electrical shock, remove test lead before opening the
cover. Repairs or servicing not covered in this manual should
only be performed by qualified personnel.