Lowrance ep-50 storage device Manuale Utente

 1 

Pub. 988-0154-521 

EP-50 Storage Device 

Electronic Probe 

Installation Instructions 

This instruction sheet tells how to connect your EP-50 storage device to 
a NMEA 2000



 network using LowranceNET

 network components. 

You must refer to your digital gauge, sonar or GPS unit's manual for 
sensor operation instructions. 

CAUTION: 

Installing LowranceNET NMEA 2000 devices is significantly 
different from installing earlier Lowrance components without 
NMEA 2000 features. You should read all of the installation 
instructions before proceeding. You should decide where to 
install all components before drilling any holes in your vessel. 

Some sonar or GPS units may require: 1. a software upgrade to display 
NMEA 2000 data correctly; and 2. a manual addendum describing how 
to operate the sensor. You can download these free and get additional 
information on the NMEA 2000



 compatible LowranceNET

 system at 

our web site, 

www.lowrance.com

. 

All Lowrance NMEA 2000 capable devices are either NMEA 2000 
certified or certification is pending. See our web site for the latest 
product status information. 

 

The EP-50 storage device.