E-Mu orbit v2 Manuale Utente

Pagina di 140
5
Chapter 1: Basic Setup
CONNECTION INSTRUCTIONS
• • • If Orbit does not seem
to be responding correctly,
make sure that both Orbit
and your MIDI controller are
set to the same MIDI chan-
nel.
SETUP #1  BASIC SETUP
MIDI In
Orbit is controlled by MIDI messages received at the MIDI In
connector. Connect the MIDI In of the Orbit to the MIDI Out
connector of a MIDI controller such as a MIDI keyboard or MIDI
percussion controller.
Outputs
Orbit is a high quality, stereo audio device. In order to reproduce
its wide dynamic range and frequency response, use a high qual-
ity amplification and speaker system such as a keyboard amplifier
or home stereo system. A stereo setup is highly desirable because
of the added realism of stereophonic sound. Headphones can be
used if an amplifier and speaker system is not available. Plug
stereo headphones into the headphone jack located on the left
side of the front panel. The Right Main output jack serves as a
mono output when the Left Main plug is not plugged in.
R - SUB2 - L
R - SUB1 - L
R - MAIN - L
MONO
STEREO
THRU
OUT
IN
OUTPUTS
MIDI
Scotts Valley, California U.S.A.
100-250VAC  50/60 Hz ~
E-MU SYSTEMS, INC.
WARNING: TO REDUCE THE  RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
Main Outs to Mixer In
MIDI Controller
(MIDI Keyboard, Sequencer, etc.)
MIDI Out
Aux. or
Tape In
Male RCA plug
to
Male Phono Plug
To
Main Outs
Home Stereo
System
Home Studio
System
Speakers
Amp
Mixer
The Headphone 
Output is located
on the Front Panel
Control
Pedal
 The headphone output
monitors the main outputs
only.
The submix outputs do NOT
feed into the headphone
output.