MINOURA bike tower Manuale Utente

- 2 -

!

HOW TO SETUP BIKE TOWER

Required tool : 5mm hex wrench (included)

We explain the name of each part as below;

1

Assemble the cradles.
Place the Angle Adjust Plate onto the Lower Support,
then put the Alloy Stay on it.  Fix three parts with the
supplied M6x20 bolt in the upper hole. (see Fig. C)
Screw the supplied M6x15 bolt in the lower hole, but
you don’t need to tighten it so firmly at this time.

(Fig. A)

Loosen the upper bolt on the Pole Joint then extend the main pole.
After you fit the main pole to the ceiling, tighten the bolt slightly.
(see Fig. A)

2

Remove the main pole, making sure the pole length is not
changed.
Extend the main pole 20mm more, then tighten the upper
bolt on the Pole Joint firmly to set the pole length. (see Fig. B)

(Fig. B)

3

(Fig. C)