efd 790 Guida All'Installazione
M
VALVEMATE
7090
M
Installation
1.
Connect the motor lead wire to
the I/0 connector position 7 (white
wire) and position 8 (brown wire).
the I/0 connector position 7 (white
wire) and position 8 (brown wire).
2.
Install the barrel of red purge
compound (supplied) onto the
dispense valve-inlet fitting.
compound (supplied) onto the
dispense valve-inlet fitting.
3.
Press the barrel into the fitting
while rotating one-half turn
clockwise. Do not overtighten.
while rotating one-half turn
clockwise. Do not overtighten.
4.
Attach the yellow end of the
barrel adapter assembly to the
barrel of red purge compound.
barrel adapter assembly to the
barrel of red purge compound.
5.
Install the black quick-connect
into the air output connector
labeled "Constant Pressure.”
into the air output connector
labeled "Constant Pressure.”
6.
Install a pink 20 gauge dispens-
ing tip (supplied, part #5120-1/4)
onto the valve outlet.
ing tip (supplied, part #5120-1/4)
onto the valve outlet.
Prior to installing this valve, please
read the associated reservoir and
valve controller operating instruc-
tions to become familiar with the
operation of all components of the
dispensing system.
read the associated reservoir and
valve controller operating instruc-
tions to become familiar with the
operation of all components of the
dispensing system.
1
4
5
2
3
6