silent-knight sk-5208 Manuale Utente

These instructions must be framed and displayed next to the panel in accordance with NFPA 
72 fire code for Local Fire Alarm System.

Test the system

 

6\VWHP 7HVW

(QWHU &RGH

Enter Code

The system will perform a display lamp test and a 
communication test.

Reset Alarms

 

5HVHW $ODUP

(QWHU &RGH

Enter Code

Resets system.

Reset the Dialer

 

5HVHW 'LDOHU

(QWHU &RGH

Enter Code

Resets the dialer and aborts the call to central station.

Display History 
Events

 

+LVWRU\ (YHQWV

(QWHU &RGH

Enter Code

Displays the panel history, which includes alarms, 
supervisories, troubles, reports, time and date changes, etc.

Show Status

 

6KRZ 6WDWXV

(QWHU &RGH

Enter Code

View existing system status. List Alarms first, 
supervisories and then troubles.

Silence Troubles or 
Alarms

  

or

6LOHQFH

(QWHU &RGH

Enter Code

Disable/Enable a Zone Zone # + 

 

'LVDEOH =RQH

(QWHU &RGH

Enter Code

Repeat the process to enable the zone.

Disable/Enable NAC

  

NAC 

# 

+ 

'LVDEOH 1$&

(QWHU &RGH

Enter Code

Repeat the process to enable the NAC.

Conduct a Fire Drill

 

 

)LUH 'ULOO

(QWHU &RGH

Enter Code

To End the Fire Drill press 

 then code.

Reset Detectors

 

 

5VW 6PN 3ZU

(QWHU &RGH

Enter Code

Resets all smoke detector power.

Walk Test the System

 

 

:DON 7HVW

(QWHU &RGH

Enter Code

To End the Walk Test press 

.

Menu of Options

Press  

or  

to scroll trough list.

Enter Installer
Code

To exit press 

 or wait 15 seconds.

Acknowledge Events

Events can be acknowledged by pressing the 

 button. No code is required to acknowledge events. The status LEDs 

(Alarm, Supervisory and Trouble) will flash when an un-acknowledged alarm, supervisory, or trouble condition exists. 
After each event has been acknowledged its associated LED (Alarm, Supervisory, or Trouble LED) stop flashing and turn on 
steady. When viewing system status the LCD displays “Acked” for each individual event once it has been acknowledged. The 
control panel piezo will silence after all alarms have been acknowledged.
Note:  The control panel piezo will continue to sound for Supervisories and Troubles even after the event has been 

acknowledged. Supervisories and troubles will silence once the event is restored.

After the event is acknowledged an event is added to the event history buffer. Acknowledged events in the history buffer will be 
preceded with an asterisk “*”.

ALARM (red)

Off

Normal condition

On

System in alarm.

Flashing

LED will flash when a alarm condition exists that has not been acknowledged.

SUPERVISORY (yellow)

Off

Normal condition

On

If a supervisory condition exist on the system.

Flashing

LED will flash when a supervisory condition exists that has not been acknowledged.

TROUBLE (yellow)

Off

Normal condition

On

Trouble condition exists

Flashing

LED will flash when a trouble condition exists that has not been acknowledged.

SILENCED (yellow)

Off

Normal condition.

On

Alarm or trouble condition has been silenced but condition still exists.

AC (green)

On

Panel is running on AC (normal condition); standby battery fully charged.

Off

Panel has lost all power.

Flashing

Panel is running on battery power only or AC power only.

For Service Contact: