Belinea 101927 Manuale Utente

Belinea 10 19 27 - Operating Instructions - 4

Carefully lift the monitor out of the packaging and make 
sure that all components are included (see fi g. 1).

Save the original box and packing material in case you 
have to ship or transport the monitor.

To set up the device, you must fi t the monitor base 
together. 

± To connect the monitor to your PC ........................
1.  Make sure that the PC and monitor are unplugged. 

2.  Connect the 15-pin signal cable to the monitor and 

the PC (see fi g. 2a).

3.  If you have a graphic card with a digital DVI-D con-

nector (24-pin socket), then connect one end of the 
DVI-D cable (optional) to the DVI-D connector of 
your monitor (see fi g. 2b), the other end to the com-
puter. 

± Connecting the audio cable  ....................................
If your computer is equipped with an audio output port, 
then connect one end of the sound cable to the audio 
input connector of the monitor (

 in fi g. 3) and the other 

end to the Line-Out connector of the computer. 

± To connect the monitor to the power source ........
Connect the separate power cable (

 in fi g. 3) to the 

monitor and a grounded outlet.

1.  First start your PC and then turn on your Belinea 

monitor using the power switch (

 in fi g. 4). The 

status indicator (

 

in fi g. 4) should light up green.

2.  Adjust the image to meet your requirements (see the 

following sections “Basic Setup” and “Image settings 
using the OSD menu”). 

3.  If there is no image displayed on the monitor, consult 

the section “Troubleshooting”.