Belinea 101927 Manuale Utente
Belinea 10 19 27 - Operating Instructions - 7
ENGLISH
Blank Screen
Power indicator is off
-
Check if the power cable is connected properly (see section “Connecting”).
-
Make sure that the monitor was turned on using the power switch (see section “Startup”).
Power indicator lights orange
-
Perhaps a power saving mode is active? Press any key on your keyboard or move the mouse.
Power indicator lights green
-
A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard
or move the mouse.
or move the mouse.
“No Signal” message
-
Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
-
Is the PC turned on (see your PC’s documentation)?
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
LCD panel
19 inch diagonal size (48.3 cm visible), low radiation according to TCO ’99, certifi ed
to ISO 13406-2, pixel fault class II, TN panel technology
to ISO 13406-2, pixel fault class II, TN panel technology
Contrast ratio
550:1 (typical) / 650:1 (max.)
Viewing angle
(Contrast ratio ≥ 10:1) horizontal 140°, vertical 135° (typical)
(Contrast ratio ≥ 5:1) horizontal 160°, vertical 150° (typical)
(Contrast ratio ≥ 5:1) horizontal 160°, vertical 150° (typical)
Response time
3,9 ms (with overdrive)
Brightness 270
cd/m
2
(typical) / 290 cd/m
2
(max.)
Input signal
Video: analog (15-pin Mini-D-SUB) and digital (24-pin DVI-D)
Display colors
16.2 mill. colors
Synchronization
31–83 kHz horizontal, 56–75 Hz vertical
Video band width
135 MHz (pixel rate)
Ergonomic resolution
1280 × 1024 (60 Hz)
Audio
Amplifi er: 1 W at 8 Ohms
Loudspeaker: 1 W continuous load, 1.5 W peak power
Loudspeaker: 1 W continuous load, 1.5 W peak power
Power connection
100–240 V AC, 50/60 Hz
Power consumption
ON status: < 45 W; color of the status LED: green
SLEEP status: < 4 W; color of the status LED: orange
Power saving functions EPA certifi ed
SLEEP status: < 4 W; color of the status LED: orange
Power saving functions EPA certifi ed
Dimensions/weight
Width: 426 mm, height: 437 mm, depth: 198 mm; 5.0 kg (net)
Operating environment
Operation: 0 to +40 °C, humidity: 20–80 % (without condensation)
Storage: -20 to +60 °C, humidity: 8–95 % (without condensation)
Display Problems
Image is displaced to the left/right or to the top/bottom
-
If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter “Basic Setup”, section “Automatic Image Adjustment” or chapter “OSD Menu Functions”, section “Posi-
tion”.
chapter “Basic Setup”, section “Automatic Image Adjustment” or chapter “OSD Menu Functions”, section “Posi-
tion”.
Image flickers or is shaky
- Perhaps setup fi le chosen for the monitor is incorrect. For information on monitor setup under Windows
®
9x/ME/2000/NT/XP consult the “Confi guration” section.
Image is blurred
-
Check brightness and contrast settings (see chapter “OSD Menu Functions”, section “Brightness/Contrast”).
-
Check the resolution setting (see “Other” functions in the “OSD Menu Functions” section).
Color problems
-
If the colors are off (e.g. white is not really displayed as white, etc.), you should adjust the color temperature (see
“Color” function in section “OSD Menu Functions”).
“Color” function in section “OSD Menu Functions”).