sentrol zxlcd Manuale Utente

23

When your system detects a trouble condition, the Control Station will
alternate between displaying the system state (Ready to Arm, etc.) and
the trouble message, with each message displayed for two seconds at a
time.  If more than one trouble condition is present, then each trouble
condition is displayed separately. Refer to the Installation Manual or
your Security Company Representative for a description of the possible
trouble conditions.

To silence the trouble sounder:

1.

Press

   .  The Control Station will display:

2.

Enter passcode:

After you silence the trouble sounder, the Control Station display will
alternate between the system status and the trouble message. If you
have an RF User Device Low Battery or your system is a ZX440F, then as
long as the trouble condition is present, an audible trouble output may
sound briefly every four hours.

Press the View Info key (Key #1) repeatedly to display the following
zone conditions that may have occurred:  Trouble Zones, Faulted
Zones, and/or Bypassed Zones.  The Control Station will display the
zone condition and the zone name and number.

TO TURN OFF
ENTER PASSCODE

OFF

CANCEL