Pentax WG-10 Guida Al Funzionamento

121

3

Taking Pic

tures

You can set the area of the screen where the brightness is metered 

to determine the exposure.

1

Press the 3 button in A mode.

The [A Rec. Mode] menu appears.

2

Use the four-way controller (23) to select [AE Metering].

3

Press the four-way controller (5).

A pull-down menu appears.

4

Use the four-way controller 

(23) to select a metering 

method.

5

Press the 4 button.

The setting is saved.

6

Press the 3 button.

The camera returns to capture mode.

Setting the AE Metering

L

Multi-segment 

metering

The camera divides the image into 256 areas, meters 

the brightness and determines the exposure.

M

Center-weighted 

metering

The camera takes a reading of the overall brightness 

of the picture with the center of the image having more 

influence on the exposure.

N

Spot AE metering The camera determines the exposure by metering 

the brightness only at the center of the image.

•

When the shutter release button is pressed halfway, the brightness 

is metered and the exposure is determined.

•

When the subject is outside the focusing area and you want to use 

Spot AE metering, aim the camera at the subject and press and hold 

the shutter release button halfway to lock the exposure, then compose 

your picture again and press the shutter release button fully.

•

Depending on the selected shooting mode, the [AE Metering] setting 

may not be changed. Refer to “Functions Available for Each Shooting 

Mode” (p.266) for details.

Saving the AE Metering setting 1p.149

ڎڎ

WG10_OPM_ENG.book  Page 121  Friday, February 1, 2013  5:30 PM