Pentax AF 360 FGZ II Guida Al Funzionamento
![Pentax](https://files.manualsbrain.com/attachments/cf57e057b1853f5a925a8a34213af9a32c5c3c36/common/fit/150/50/7a6ac7ef4342942783f452ad3ad1a82455d7400b56f932644a932c7cb588/brand_logo.png)
28
2
n
Wireless Mode (P-TTL)
1
Turn on the power switch (ON).
2
Press the flash mode button (MODE) to display
P-TTL
MASTER on the LCD panel.
3
Press the setting button (SET) to blink the wireless mode
setting.
4
Rotate the adjustment dial to select the desired setting from
MASTER/CONTROL/SLAVE.
5
Press the setting button (SET) to complete the setting, and
take a picture after confirming the Ready lamp is lit.
• When SLAVE is selected, the Ready lamp blinks after the
flash unit is fully charged.
• If you select MASTER or SLAVE, you can configure
settings of flash output compensation and flash output by
pressing the setting button (SET).
• Refer to “Advanced Functions” (page 40) on how to use
wireless mode.
Wireless mode (P-TTL)
AF360FZ_540FGZ.book Page 28 Friday, December 20, 2013 6:11 PM