Pentax AF 360 FGZ II Guida Al Funzionamento

Check that the Ready lamp is lit, then take a picture.

• When charging is complete, ( ) is lit in the viewfinder of

the camera.

• Position this flash unit so that the wireless slave sensor

can receive the flash discharged by the camera’s built-in

flash unit or attached flash unit.

• This flash unit will discharge at the same time that the

camera’s flash discharges.

• Keep the flash unit attached to the camera or this flash

unit, within approx. 4 meters of the subject.

• In slave mode, this flash unit will turn off automatically

after about 1 hour of non-operation when the auto power

off function is set.

• Do not use red-eye reduction with the camera’s flash.

This will result in this flash unit firing by the pre-flash. For

the same reason, set the camera to manual focus when

firing the flash continuously so that the AF spot beam

does not operate with cameras that have AF spot beam

functions.

AF360FZ_540FGZ.book Page 49 Friday, December 20, 2013 6:11 PM