Panasonic TH-47LFT30W Guida Al Funzionamento
Power Indicator
Remote Control
Sensor
Sensor
Power switch
(Main unit
bottom)
14
Power On / Off
Press the
button on the remote control to turn the Display off.
Power Indicator: Red (standby)
Press the
button on the remote control to turn the Display on.
Power Indicator: Green
Turn the power to the Display off by pressing the
switch on the unit, when
the Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
During operation of the power management function, the power indicator turns
orange in the power off state.
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power
• Main plug types vary between countries. The power
plug shown at right may, therefore, not be the type
fi tted to your set. (see page 11)
fi tted to your set. (see page 11)
• When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the socket
outlet fi rst.
outlet fi rst.
Press the Power switch on the Display to turn the
set on: Power-On.
set on: Power-On.
Power Indicator: Green
Connecting the AC cord plug to the Display. (see page 12)
Note:
Depending on the country of
destination, relay type or direct attached
type of the power supply cord is used.
destination, relay type or direct attached
type of the power supply cord is used.