Panasonic TH-47LFT30W Guida Al Funzionamento

Adjust the horizontal position.

Adjust the vertical position.

Adjust the horizontal size.

Adjust the vertical size.

(During PC input signal)
Eliminate the fl ickering and distortion.

Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, 
adjust so that any such noise is minimized.

Over scan Turn image over scan On/Off.

Confi gurable signals are as follows:
525i, 525p, 625i, 625p, 750/60p, 750/50p (DVI, HDMI)

            On                                 Off
Notes:
•  “Off” is effective during only “16:9” aspect mode.
•  When “Off” is set, “H-Size” and “V-Size” cannot be adjusted.

Adjusts the display size when 1125i or 1125p signal is input.
Notes:
•  “On” is effective during only “16:9” aspect mode.
•  Select On when you would like to replay 1920 × 1080 input signal.
•  Applicable input signal;
  1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p
•  Select Off when fl ickering is shown around the image.
•  H-Size and V-Size cannot be adjusted when On is selected.

 Off 

On

While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION (  ) button is 
pressed during “Normalise”, then all adjustment values (except “Clock Phase” and “Dot Clock”) are returned to the factory settings.

Normalise