Panasonic CZ256ESMC2 Guida Al Funzionamento

27

2

  Touch a distribution group. A keyboard window like the one shown above appears. Use the keyboard 

to enter a distribution group number and to select the product type from among PAC, GHP and HOT.

  Select “Simple” or “Load” in the distribution methods.

*  Refer to “10. Calculating air conditioner distribution” for details.
  The tenant set at “Load” distribution will have its “No” box display in light blue.
*  The distribution group number range is from 1 to 8.

*  This button is invalid when “No Distrib.” has been set. (Refer to 

Main

Sub

)

*  The distribution group column set at loaded distribution has no product type such as “PAC” and “GHP” 

displayed.

*  Make manual cut-off in advance to change the distribution method.

3

  Press the   Type  button to select “PAC” or “GHP” for the following unit that is unable to 

automatically recognize product type.
- Interface Adaptor
This is only for “Simple distribution” setting.

4

  Specify which distribution method, “Simple” or “Load,” to apply to the selected distribution group.

5

  Touch  Set  to confi rm the setting, or   Cancel  to cancel it.

• PAC, GHP, and HOT cannot be mixed in the same group. Set up a separate distribution group for each 

type.

• HOT multi units cannot be recognized automatically (they are recognized as PAC). Manually set the 

product type to HOT.

• HOT Tenants cannot be set at the “Load” distribution.

• “Load” distribution tenants cannot be set at “HOT”.

• Air conditioners unadaptable to loaded distribution cannot be set at “Load” Distribution.

• Interface Adaptors are also unadaptable to loaded distribution.

Main

Sub

CZ-256ESMC2_EN.indb   27

CZ-256ESMC2_EN.indb   27

9/14/2011   3:16:47 PM

9/14/2011   3:16:47 PM