Panasonic KXTG7100CX Guida Al Funzionamento
–
3
–
5
Frequently asked questions
Handset phonebook: storing an
entry (name and phone
numbers)
entry (name and phone
numbers)
{k}
i {j/OK} i “
New Entry
” i {>} i
Enter the party’s name (16 characters max.). i
{j
{j
/OK} i Enter the party’s phone number (24 digits
max.). i {j/OK} i “
Save
” i {>} i {ih}
L
To enter a name, see the character table in the
operating instructions.
operating instructions.
Handset phonebook: making a
call
call
{k}
i Press {^} or {V} to display the desired entry.
i
{C}
Handset ringer volume
{j
/OK} i “
Handset Setup
” i {>} i
“
Ringer Setup
” i {>} i “
Ringer Volume
”
i
{>} i Press {^} or {V} to select the desired
volume. i {>} i {ih}
Changing ringtone
(outside calls)
(outside calls)
{j
/OK} i “
Handset Setup
” i {>} i
“
Ringer Setup
” i {>} i “
Ext. Ringtone
”
i
{>} i Select the desired ringtone. i {>} i
{ih}
Question
Cause & solution
What kind of power outlet should
I connect the AC adaptor to?
I connect the AC adaptor to?
Connect the AC adaptor to a 220–240 V outlet.
Why is w flashing?
L
The handset is too far from the base unit. Move closer.
L
The AC adaptor is not connected. Check the
connections.
connections.
L
You are using the handset or base unit in an area with
high electrical interference. Place the handset and
base unit away from interference sources, such as
antennas and mobile phones.
high electrical interference. Place the handset and
base unit away from interference sources, such as
antennas and mobile phones.
L
The handset is not registered to the base unit.
Register it.
Register it.
{j
/OK} i “
Handset Setup
” i {>} i
“
Registration
” i {>} i “
Register H.set
”
i
{>} i Press and hold {x} on the base unit for
about 3 seconds, until the registration tone sounds. i
Wait until “
Wait until “
Enter Base PIN
” is displayed. i Enter
the base unit PIN (default: “
0000
”). i {j/OK}
Why can I not make calls?
The dialling mode setting is incorrect. Set to “
Tone
” or
“
Pulse
” as needed.
Why is the handset display
blank?
blank?
The handset is not turned on. To turn the power on,
press {ih} for about 1 second.
press {ih} for about 1 second.
Feature
Operation
TG7100CX(e-e)_QG.fm Page 3 Thursday, May 11, 2006 8:06 PM