Panasonic KXMB1530E Guida Al Funzionamento

Changing the password for
feature programming via
remote operation
MBNM1NM5NM5N

1. MMenuN A MBNM1NM5NM5N A MSetN
2. Enter the current password. A MSetN

R The default password is “1234”.

3. Enter a new 4-digit password using 0-9. A MSetN
4. Enter the new password again. A MSetN A MMenuN

Note:
R It is recommended that you change this password from the default

password.

Setting the toner
maintenance time
MBNM1NM5NM8N
(KX-MB1520/KX-MB1530
only)

The unit will automatically activate for maintenance, once every 24 hours. This
function prevents toner from solidifying inside the cartridge. This function is
important to prevent a unit malfunction and the noise that the unit makes during
this sequence cannot be stopped. However if the timing of this sequence is
inconvenient, you can change the scheduled start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.

R The default time is “12:00”.
R If you selected 12-hour time entry (page 20), press MHN repeatedly to

select AM or PM.

R If you selected 24-hour time entry (page 20), the time is set using

24-hour time entry.

3. MSetN A MMenuN

Resetting all features (and
deleting all data in memory)
MBNM1NM5NM9N

Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB1520/KX-MB1530 only: Phonebook (or caller information) and fax
transmission data (journal report and faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord (KX-MB1520/KX-MB1530 only) and

USB cable before activating this feature.

To reset all features:
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN

Setting the ringer pattern
MBNM1NM6NM1N
(KX-MB1520/KX-MB1530
only)

M1N “A” (default)
M2N “B”
M3N “C”

Setting the beep sounds and
keytones
MBNM1NM6NM5N

M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.

Note:
R Even if this feature is set to “OFF”, the unit beeps in some cases. For

example:
– the memory reception alert setting (feature #437 on page 60) is

activated (KX-MB1520/KX-MB1530 only).

– the front cover is opened.

Setting the off-hook alert
MBNM1NM7NM1N
(KX-MB1520/KX-MB1530
only)

To alert you with a beeping sound when the telephone line has been left
off-hook for more than 1 minute without dialling.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You have to press MStopN or MSP-PhoneN to stop the
beeping sound.

53