Panasonic KXTCD220G Guida Al Funzionamento
Making/Answering Calls
13
Recording a telephone conversation
You can record your conversation while on an
outside call.
Wichtig:
L
You can record your conversation while on an
outside call.
Wichtig:
L
Before recording a conversation, you should
inform the other party that the conversation will
be recorded.
inform the other party that the conversation will
be recorded.
1
Press {j/OK} during a conversation.
2
Select “Gespräch aufz.”, then press
{>}
{>}
.
3
To stop recording, press {j/OK}.
Hinweis:
L
L
Recorded conversations are treated as new
messages.
messages.
L
To listen to the recorded conversation, see
Seite 43.
Seite 43.
L
If message memory becomes full, “Speicher
Voll” is displayed and recording stops. Erase
unnecessary messages (Seite 43).
Voll” is displayed and recording stops. Erase
unnecessary messages (Seite 43).
L
While recording a conversation, you cannot
change the tone quality of the handset.
change the tone quality of the handset.
Answering calls
1
Lift the handset and press {C} or {s} when
the unit rings.
L
the unit rings.
L
You can also answer a call by pressing any
dial key from {0} to {9}, {*}, {#}, or {INT}.
(Any key answer feature)
dial key from {0} to {9}, {*}, {#}, or {INT}.
(Any key answer feature)
2
When finished talking, press {ih} or place
the handset on the base unit.
the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the handset
off the base unit. You do not need to press {C}.
To turn this feature on, see Seite 23.
You can answer calls simply by lifting the handset
off the base unit. You do not need to press {C}.
To turn this feature on, see Seite 23.
To adjust the ringer volume when an outside
call comes in
Press {e} or {v} when an outside call comes in.
Hinweis:
L
call comes in
Press {e} or {v} when an outside call comes in.
Hinweis:
L
The ringer volume cannot be adjusted if the
handset is on the base unit.
handset is on the base unit.
Other features
Handset locator
Using this feature, you can locate the handset if it
has been misplaced.
Using this feature, you can locate the handset if it
has been misplaced.
1
Press {x} on the base unit.
L
L
The base unit will page the handset for
about 1 minute.
about 1 minute.
2
To stop paging, press {x} on the base unit
or press {ih} on the handset.
or press {ih} on the handset.
TCD220G(e-g).book Page 13 Thursday, January 20, 2005 11:43 AM