Panasonic CUCE9LKE Guida Al Funzionamento

REMOTE CONTROL

•  Please be aware of the OFF indication on the remote 

control display to prevent the unit from starting/stopping 

improperly.

 TO SET TEMPERATURE

•  Selection range: 16°C ~ 30°C (Not applicable for FAN 

mode).

•  Operating the unit within the recommended temperature 

could induce energy saving.

HEAT mode : 20°C ~ 24°C.

COOL mode : 26°C ~ 28°C.

DRY mode : 1°C ~ 2°C lower than room temperature.

HEAT mode - To enjoy warm air
•  Unit takes a while to warm up. The power indicator blinks 

during this operation.

•  Unit may stops warm air supply for deice. The deice 

indicator ON during this operation.

COOL mode - To enjoy cool air
•  Use curtains to screen off sunlight and outdoor heat to 

reduce power consumption during cool mode.

DRY mode - To dehumidify the environment
•  Unit operates at low fan speed to give a gentle cooling 

operation.

FAN mode - To circulate air in the room
AUTO mode - For your convenience
•  During operation mode selection the power indicator 

blinks.

•  Unit selects operation mode every 30 minutes according 

to temperature setting, outdoor and room temperature.

Maximum distances: 8m

 

POWER/DEICE

(Green/Blue)

 

TIMER

(Orange)

DRY

FAN

SPEED

AIR

SWING

FAN SPEED

AIR SWING

MODE

TEMP

OFF/ON

TIMER

SET

CANCEL

ON

OFF

1

2

3

SET CHECK

CLOCK

RESET

AC

RC

AUTO

HEAT

COOL

FAN

FAN SPEED

•  For AUTO, the indoor fan speed is automatically adjusted 

according to the operation mode.

AIR SWING

•  Keeps the room ventilated.

•  In COOL/DRY mode, if AUTO is set, the louver swing 

up/down automatically.

•  In HEAT mode, if AUTO is set, the horizontal louver fi x at 

predetermined position.

Press and hold for 5 seconds to dim or restore the 

unit’s indicator brightness.

Press and hold for approximately 10 seconds to 

show temperature setting in °C or °F.

Press to restore the remote control’s default setting.

Not used in normal operations.