Panasonic KX-P8420 Guida Al Funzionamento
86
Installing Software for Windows
■
Setting up TCP/IP and LPR printing with Windows NT 4.0
Once you have installed the PostScript driver for Windows NT 4.0 complete
the setup for the TCP/IP and lpr connection as follows:
the setup for the TCP/IP and lpr connection as follows:
•
Prepare the KX-P8420 to accept print jobs using TCP/IP and lpr
protocols.
protocols.
•
Configure the workstation for the TCP/IP connection.
Before you continue, ask the system administrator for the IP address
assigned to the KX-P8420 and the subnet mask as well as gateway
address, if they are used.
assigned to the KX-P8420 and the subnet mask as well as gateway
address, if they are used.
To prepare the KX-P8420 for TCP/IP and LPR printing:
1
With the KX-P8420 turned off, connect it to the network.
2
Turn on the printer.
Wait until
Ready
or
Ready(Sleep)
is displayed.
3
Press the Menu/Exit button of the printer’s front panel.
4
Press the Continue/Forward or Cancel/Left button to
advance to Network Protocol Setup menu.
advance to Network Protocol Setup menu.
5
Enable TCP/IP and enter the appropriate settings for
IP address, subnet mask and gateway address.
IP address, subnet mask and gateway address.
For details, see
6
Press the Menu/Exit button to exit the setup menus.
The TCP/IP Protocol and Microsoft TCP/IP Printing software should already
be installed on the workstation for Windows NT 4.0.
be installed on the workstation for Windows NT 4.0.