Panasonic DMREZ28 Guida Al Funzionamento

18

RQT9118

Refer to “Important Notes for Recording” (

➔ 21) and “Advanced Recording” (➔ 22 to 24) for detail information on 

recording.

 

 

 

 

 

 

Turn on the television and select the appropriate video input to suit the 
connections to this unit.

 If the disc is protected, release protection (

➔ 48).

•

•

 

 to turn the unit on.

 

 to open the tray 

(Button located on front of the unit)

Insert a disc with enough remaining blank space and press 
[; OPEN/CLOSE] again to close the tray.
When the format confirmation screen is displayed (

➔ 23)

–

–

 

 to select desired channel.

To select with the numbered buttons (

➔ 16)

When no channel setting is performed on the unit and broadcast is 
recorded directly from the satellite receiver, select a channel on the 
connected equipment and press [INPUT SELECT] to select “AV2”.

–
–

 

 to select the recording mode.

Recording mode (

➔ 22) Remaining time

 

 to start recording.

Elapsed recording time

Pausing Recording

Press [h PAUSE].
– Press again to restart recording.

(The title is not divided.)

Stopping Recording

Press [g STOP].

 Tips

 

 

 

 

To use a new disc, formatting is 
necessary.

 Notes

 

 

 

 

 

It takes about 30 seconds for the unit 
to complete recording management 
information after recording finishes.
You cannot change the channel or 
recording mode during recording.
This unit cannot record NTSC signals 
to discs that already have PAL signal 
recordings. 

•

•

•

DMR-EZ28-EB _RQT9118-B.indb   18

DMR-EZ28-EB _RQT9118-B.indb   18

2008/04/04   10:31:54

2008/04/04   10:31:54