Panasonic DMREX769EB Guida Al Funzionamento
72
RQT9307
Recording
Page
Can I record from a commercially
purchased video cassette or DVD?
purchased video cassette or DVD?
Most commercially sold video cassettes and DVDs are copy protected;
therefore, recording is usually not possible.
−
Can DVD-R, DVD-R DL, DVD-RW
(DVD-Video format), +R, +R DL,
and +RW recorded on the unit be
played on other equipment?
(DVD-Video format), +R, +R DL,
and +RW recorded on the unit be
played on other equipment?
You can play these discs on compatible equipment such as DVD players
after finalising the disc on this unit.
[+RW] It is not necessary to finalise +RW. To enable play on other DVD
players, please use “Create Top Menu” in the DVD Management menu.
[+RW] It is not necessary to finalise +RW. To enable play on other DVD
players, please use “Create Top Menu” in the DVD Management menu.
59
In any case, ability to play a disc depends on the condition of the recording,
the quality of the disc, and the capability and format constraints of the DVD
player.
player.
−
If you play a DVD-R DL, +R DL or +RW, use compatible equipment.
−
Can a digital audio signal from
the unit be recorded to other
equipment?
the unit be recorded to other
equipment?
You can record if using the PCM signal. When recording DVD, change the
“Digital Audio Output” settings to the following via the Setup menu:
– PCM Down Conversion: “On”
– Dolby Digital: “PCM”
– DTS: “PCM”
– MPEG: “PCM”
However, only
– As long as digital recording from the disc is permitted.
– As long as the recording equipment is compatible with 48 kHz sampling
– PCM Down Conversion: “On”
– Dolby Digital: “PCM”
– DTS: “PCM”
– MPEG: “PCM”
However, only
– As long as digital recording from the disc is permitted.
– As long as the recording equipment is compatible with 48 kHz sampling
frequency.
63
You cannot record MP3 signals.
−
GUIDE Plus+
Page
Is it possible to programme a
recording, with a start and end time
that are different from the GUIDE
Plus+ system?
recording, with a start and end time
that are different from the GUIDE
Plus+ system?
You can manually change the start and end time of programmes in the
Timer Recording menu.
But if timings are altered by more than 10 minutes, “Guide Link” will not be
able to function.
But if timings are altered by more than 10 minutes, “Guide Link” will not be
able to function.
28
Can I receive GUIDE Plus+ system
data via a connected digital satellite
receiver or a Set Top Box?
data via a connected digital satellite
receiver or a Set Top Box?
No, only via the built-in tuner. To perform timer recordings with digital
satellite receivers or Set Top Boxes, please use the External Link feature or
your unit’s manual timer programming.
your unit’s manual timer programming.
27, 28
How can I cancel a timer
programming?
programming?
Press [PROG/CHECK] and select the desired entry and then press
[DELETE ].
29
What happens when I unplug my
unit from the household mains
socket?
unit from the household mains
socket?
The GUIDE Plus+ system data will not be updated. If the unit is
disconnected from the AC mains for a longer period of time, then the GUIDE
Plus+ data is lost.
Plus+ data is lost.
−
Perform “DVB Auto Setup” in the Setup menu.
61
DVB-T
Page
Which aerial is suitable for receiving
digital terrestrial broadcasts?
digital terrestrial broadcasts?
Any (terrestrial) roof aerial can be used. However, depending on the area
where you live, a new aerial may be necessary. Consult your local TV
aerial installer.
aerial installer.
−
Can this unit receive or record High
Defi nition (HD) broadcasts?
Defi nition (HD) broadcasts?
No, this unit cannot receive or record High Definition (HD) broadcasts.
−
Frequently Asked Questions
DMR-EX769EB.indb 72
DMR-EX769EB.indb 72
2009/01/26 17:06:24
2009/01/26 17:06:24