Panasonic DMRES35V Guida Al Funzionamento

When connecting the IN2 input terminals on the front of the unit
≥You can also connect to the IN1 input terminals on the rear of the 

unit.

Notes
≥When recording using the unit’s input terminals, only the sound 

received at the time of recording will be recorded. As long as 
secondary audio that is recorded on the media in the external 
device is not output to the unit in play, it is not recorded.

≥If the audio output of the other equipment is monaural, connect to 

L/MONO. (Both left and right channels are recorded when 
connected through L/MONO.)

≥The S-VIDEO terminal achieves a more vivid picture than the 

VIDEO terminal.

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

≥Release protection (disc 

l 53, cartridge l 53). [RAM]

≥Select DVD side with pressing [DRIVE SELECT].
VHS
≥Insert a video cassette with an accidental erasure prevention tab. 

≥Select VHS side with pressing [DRIVE SELECT].

[1]

(DVD 

l 24, VHS l 24)

≥DVD [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

- It is also possible to perform Flexible Recording (FR). (

[2]

W, X] or [INPUT SELECT] to select 

≥Select IN1 or IN2.

Follow the above steps 1 to 2.

[3]

[4]

¥

Follow the above steps 1 to 2.

[3]

1

≥Start playing the video cassette and find the recording start 

point.

[4]

;

¥

≥Put the unit in recording standby mode.

[5]

[6]

;

∫ To skip unwanted parts 

Press [

;, PAUSE] to pause recording. (Press again to restart 

recording.)

∫ To stop recording

Press [

∫

, STOP].

For your reference 
≥Almost all videos and DVD software on sale have been treated to 

prevent illegal copying. Such software cannot be recorded.

[RAM] [-R] [-RW‹V›] [+R] [+RW] 
Programs are recorded as a title while at the same time chapters are 
created at each break in the images and the playlist is created 
automatically. 

[RAM]

Preparation
≥Turn on the main unit and DV equipment.
≥Select the type of audio recording from “Select Audio Channel for 

DV Input” in the Audio menu. (

When recording from DV equipment (e.g., digital video 
camcorder), you can record audio/video recordings from DV tape 
only.

≥Pause play on the DV equipment at the point you want recording to 

start.

≥Press [REC MODE] to select the recording mode.

[1]

[2]

3, 4] to select “Other Functions” and 

[3]

3, 4] to select “DV Camcorder Rec.” 

[4]

2, 1] to select “Rec.” and press 

When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV 
automatic recording. 

To stop recording
Press [

∫, STOP]. The confirmation screen appears. Press [ENTER].

Notes
≥Only one piece of DV equipment (e.g., digital video camcorder) 

can be connected to the unit via the DV IN terminal.

≥If you use video camcorders from other manufacturer’s these are 

not guaranteed to work.

≥If the DV equipment is in a mode for operating the SD card, it is not 

possible to record with “DV Camcorder Rec.”.

≥It is not possible to operate the unit from the connected DV 

equipment.

≥The DV IN terminal on this unit is for use with DV equipment only. 

(It cannot be connected to a computer, etc.)

≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be 

input properly.

≥The date and time information on the tape in the DV equipment will 

not be recorded.

≥You cannot record and play simultaneously.

(2)

(1)

(4)

(3)

S VIDEO

IN 2 

VIDEO

/MONO AUDIO R

L

(1) S-Video cable (not supplied) 
(2) Audio/Video cable (not supplied)

A Yellow (VIDEO)
B White (L)
C Red (R)

(3) DV cable (IEEE 1394 4-pin, not supplied)
(4) External device (Playback equipment)

If the DV automatic recording function does not work properly, 
check the connections and DV equipment settings, and turn the 
unit off and back on.
If that does not work, follow the instructions for Recording 
from an external device (

lleft).

M6VP&PC.book  50 ページ  ２００６年２月６日　月曜日　午後３時２０分