Panasonic dmre60 Manuale Istruttivo

Glossary (continued)

This function works only if the unit is connected via a fully-wired 21-pin Scart cable to a TV featuring the Q Link or similar function.
Q Link offers the following functions:
1) Download from the TV*

When you connect the unit to a TV, the station list data is automatically copied from the TV to the unit, and the TV stations are assigned to 
the programme positions on the unit in the same order as on the TV.

2) Direct TV Recording

By simply pressing [DIRECT TV REC] 

(3), you can at once record the same programme that you are watching on the TV.

3) TV/DVD Auto Power On*

Even if the TV and the unit are off (standby mode), pressing [

1] (26), [TOP MENU, DIRECT NAVIGATOR] (9), [ShowView] (2) or 

[PROG/CHECK] 

(13) automatically turns on both the TV and the unit.

If the TV is off and the unit is on, when you press the [FUNCTION] 

(11) or the [

1] (26), or insert the disc (except DVD-RAM and DVD-R), 

the TV automatically is turned on.

4) DVD Auto Power Off*

When you turn the TV off, the unit is turned off as well. However, this function works in the stop mode (except screen saver is displayed).
This function does not work during the following operations: Preset Download, Auto Setup, Auto Clock Setting and Manual Tuning.

5) On-Screen Messages*

When you are watching a TV programme, the following unit messages appear on the TV screen to inform you of the unit’s condition:

≥Depending on the type of TV used, the above messages may not appear correctly.

* The operations marked with asterisk are only available if the unit is connected to a TV featuring the Q Link function.

Note
If “Power Save” is set to “On”, the Q Link functions do not work when the unit is switched off (standby mode).

VPS (Video Programme System)/
PDC (Programme Delivery Control)
VPS or PDC is a very convenient system which assures that the TV programmes you have programmed for timer recording will be recorded 
exactly from beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension of the 
programme duration. Also, if a programme is interrupted and, for example, some special news is inserted, the recording will also be 
interrupted automatically and resumed when the programme continues.
Depending on the signals sent from the TV stations, the VPS/PDC system may not operate properly even when “VPS/PDC” has been set to “ON”.
Please check with the broadcasters in your area for details.
≥In the case of VPS/PDC recording, use the correct time (VPS/PDC time) for recording the TV programmes.

Set “VPS/PDC” to “OFF” when the recording time is not the correct time (VPS/PDC time).
VPS/PDC recording is not performed when the time (VPS/PDC time) is incorrect, even if only by one minute. To find out the correct time 
(VPS/PDC time), consult Teletext, a newspaper or magazine, or other source.

≥If the actual broadcasting times of timer recordings overlap (regardless of whether they are VPS/PDC controlled), the recording that starts 

first always has priority, and the recording of the later beginning programme will start only after the first timer recording has finished.

≥When the VPS/PDC signal drops out because the broadcast signal is weak, or when a TV station does not transmit a regular VPS/PDC 

signal, the timer recording will be performed in the normal mode (without VPS/PDC) even if it was programmed for VPS/PDC.
In this case, even if the timer recording is performed, whatever has been programmed will not be cancelled at that particular time but at 4 
a.m. the day after tomorrow.

≥The start times of scheduled programmes listed in the newspaper or magazine may be changed at a later date. Set “VPS/PDC” to “OFF” 

when programming a programme whose start time has been subsequently changed. Particular care must be taken in this respect with 
S

HOW

V

IEW

 programming since “VPS/PDC” is automatically set to “ON” in some countries.

≥If a programme listed in a newspaper or magazine has two S

HOW

V

IEW

 numbers, use the S

HOW

V

IEW

 number for VPS/PDC if you wish to 

proceed with VPS/PDC recording using S

HOW

V

IEW

 programming.

This programme has already started

A timer recording has just started.

Set DVD to timer standby mode

The unit is not in the timer standby mode 10 minutes before the programmed recording start time 
of a timer recording (message appears every minute during these 10 minutes).

DVD is in timer standby mode

[DVD, 

Í] (1) or [<, OPEN/CLOSE] (42) was pressed, although the unit is in the timer standby mode.

DVD is in timer recording mode

[DVD,

Í] (1), [∫] (7), [¥, REC] (31), [;] (8) or [ShowView] (2) was pressed while the unit is 

in the timer recording mode.

DVD(PAL).book  68 ページ  ２００３年５月１日　木曜日　午後１０時４３分