Panasonic SC-HT880 Guida Al Funzionamento

4

RQT7978

Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
≥Make sure you have all the indicated components before starting assembly, setup, and connection.
≥There is no difference between the right and left speakers and pipes.

[Note]

≥To prevent the speaker cables from being pulled out of the pipes, leave the plastic wrap on the pipes while assembling the speaker stands.
≥[HT880] [The\United\Kingdom,\Australia[and\N.Z.\

The front and surround speaker pairs as well as the pipe pairs are different.
–Check the label on the rear of the speaker before attaching the pipe (

➜ page 6).

–The pipe with the shorter cable is for the front speaker.

[HT840]

[HT880]

1

Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not 
crease), pass the folded portion through the hole, and then pull 
the rest of the cable through the base.

2

3

Secure the pipe to the base.
Ensure the screws are securely fastened.

[HT840]

[HT880] Front and surround speakers

[The\United\Kingdom,\Australia[and\N.Z.\
2 Front and 2 Surround

 speakers

[Others]
4 Front/Surround speakers

Pipes
≥2kpipes with short cable:

For front speakers

≥2kpipes with long cable:

For surround speakers

Leave the excess speaker 
cable for connecting later.

Insert the pipe while gently 
pulling on the speaker cable.

Match the groove and these 
holes with the base when you 
insert the pipe.

Phillips-head 
screwdriver (not included)

Before proceeding to the next step, please remove the 
plastic wrap from the pipe.

HT530_880_840En.book  Page 4  Friday, March 11, 2005  7:26 PM