Panasonic NVGS6GC Guida Al Funzionamento
Record mode
56
LSQT0945
Recording on a tape
Remove the lens cap. (
-45-
)
(When the camera is turned on with the lens cap
fitted, the automatic white balance adjustment
may not function properly. Please turn the camera
on after removing the lens cap.)
≥Set to Tape Recording Mode.
fitted, the automatic white balance adjustment
may not function properly. Please turn the camera
on after removing the lens cap.)
≥Set to Tape Recording Mode.
1
Press the recording start/stop button to
start recording.
start recording.
2
Press the recording start/stop button again
to pause recording.
to pause recording.
≥For the recording time on a tape, refer to
-48-
.
≥Carry out a recording check (
-57-
) to verify that
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
-57-
) .
ª
On-screen display in the tape
recording mode
recording mode
1) Recording time elapse
2) Remaining tape indication
2) Remaining tape indication
ª
Concerning the remaining tape time
indication on the screen
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
indication starts flashing.)
≥During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
is 2 to 3 minutes shorter than the actual
remaining tape time.
Recording a still picture on a tape
(Photoshot)
(Photoshot)
Still pictures can be recorded from the movie
camera lens.
camera lens.
1
Press the [PHOTO SHOT] button in the
recording pause mode.
recording pause mode.
≥The movie camera records a still picture for
about 7 seconds and then switches back to
the recording pause mode.
the recording pause mode.
≥If you set [ADVANCE] >> [SHTR EFFECT] >>
[ON], you can add image and a sound like
releasing the shutter.
releasing the shutter.
≥Photoshot recording results in slightly inferior
image quality.
ª
Continuous photoshot
If you set [ADVANCE] >> [SHTR EFFECT] >>
[ON] and keep the [PHOTO SHOT] button
pressed, the movie camera will continuously
record still pictures in approx. 0.7 seconds
intervals until the button is released.
≥The screen blinks and, at the same time, a
[ON] and keep the [PHOTO SHOT] button
pressed, the movie camera will continuously
record still pictures in approx. 0.7 seconds
intervals until the button is released.
≥The screen blinks and, at the same time, a
shutter clicking sound is recorded.
;
R 0:30
0h00m10s00f
1)
2)
PHOTO
SHOT
PHOTO
GS6GC_ENG.book 56 ページ ２００５年３月１日 火曜日 午後１時４０分