Panasonic SC-HT990 Guida Al Funzionamento

RQT8

59

6

Si

mp

le

 S

etu

p

[HT540] Front speakers

[HT990]

Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ There is no difference between the right and left speakers and stands.
≥ For optional wall mount, refer to page 8.

[Note]

≥

[HT990]

 The front and surround speakers are different.

– Check the label on the rear of speaker before attaching the stand (

➜ page 9).

– The stand with shorter cable is for the front speaker.

1 Thread the speaker cable through the base. 

For quicker threading, loosely fold the cable in half (do not 
crease), pass the folded portion through the hole, and then pull 
the rest of the cable through the base.

2 Attach the stand to the base while gently pulling on the 

1 Pull out the end of the speaker cable and position it 

2 Attach the speaker to the stand. 

Assembling the speakers

[HT540] 2 Front speakers 

[HT990]

[HT540] 2 Bases

[HT990]

[HT540] 2 Stands (with cable)

[HT990]

≥ 2kstands with short cable: For front speakers
≥ 2kstands with long cable: For surround speakers

[HT540] 8 Screws

[HT990]

Cable
Pull gently.

Screw
Tighten securely.

Slide the speaker 
cable into the groove.

Screws
Tighten securely.

Cover plate
Remove before attaching the 
speaker and keep for wall-mount 
use (

➜ page 8).

8596En_p03-15.fm  Page 6  Tuesday, February 21, 2006  10:02 PM