Panasonic KXMB2178HK Guida Al Funzionamento
3
Press Ms/MONITORN while sending the 1st page.
R Your unit will display “VOICE STANDBY”. After the other party has received the 1st page, your unit will ring
R Your unit will display “VOICE STANDBY”. After the other party has received the 1st page, your unit will ring
and “PLEASE PICK UP” will be displayed. Lift the handset to talk to the other party again.
4
5
Replace the handset to end the conversation.
10.7 Distinctive Ring service y
When a call is made to one of your phone numbers, the telephone company sends a ring pattern to your telephone
line to indicate which number the call is intended for. By setting up this unit for Distinctive Ring, you can make the unit
automatically start fax reception when a call comes to the fax number.
To use this service, you must subscribe to the Distinctive Ring service offered by your local telephone
company. Consult your local telephone company for availability.
line to indicate which number the call is intended for. By setting up this unit for Distinctive Ring, you can make the unit
automatically start fax reception when a call comes to the fax number.
To use this service, you must subscribe to the Distinctive Ring service offered by your local telephone
company. Consult your local telephone company for availability.
Important for CX models users:
R Not available when Tunisia is selected in feature #114.
Important for ML models users:
R Not available when Malaysia is selected in feature #114.
Information for HK models users:
R This feature is called Duplex Ring service (ring detection feature). When you subscribe to this service,
R Not available when Tunisia is selected in feature #114.
Important for ML models users:
R Not available when Malaysia is selected in feature #114.
Information for HK models users:
R This feature is called Duplex Ring service (ring detection feature). When you subscribe to this service,
your telephone company will assign you a new fax number and will also tell you the assigned ring pattern.
Please complete the following setup on your unit to identify the assigned ring pattern.
Please complete the following setup on your unit to identify the assigned ring pattern.
10.7.1 Using two or more phone numbers on a single telephone line
To activate this feature, set the following beforehand:
1
Mt/MENUN A MBNM4NM3NM0N A M1N A MOK/SETN A Mt/MENUN
Note:
R While the Distinctive Ring feature is activated, you cannot change the receiving mode.
R While the Distinctive Ring feature is activated, you cannot change the receiving mode.
How phone calls and faxes are received (for models other than HK)
If the incoming call is for the fax number, the unit will ring with the assigned ring pattern and automatically start fax
reception.
If the incoming call is for the phone number, the unit will continue ringing.
R If an external telephone answering machine is connected, set the ring count of the answering machine to more
If the incoming call is for the fax number, the unit will ring with the assigned ring pattern and automatically start fax
reception.
If the incoming call is for the phone number, the unit will continue ringing.
R If an external telephone answering machine is connected, set the ring count of the answering machine to more
than 2.
How phone calls and faxes are received (HK models only)
The unit will recognize incoming faxes on the second ring pattern and answer automatically. For phone calls, the unit
will ring as a normal call.
R If an external telephone answering machine is connected, set the ring count of the answering machine to more
The unit will recognize incoming faxes on the second ring pattern and answer automatically. For phone calls, the unit
will ring as a normal call.
R If an external telephone answering machine is connected, set the ring count of the answering machine to more
than 2.
10.7.2 Using three or more phone numbers on a single telephone line
R Not available for HK models.
You may wish to use three or more phone numbers for a single telephone line. In order to distinguish which number
the call was addressed to, a different ring pattern must be assigned for each number.
Example: Using three phone numbers
You may wish to use three or more phone numbers for a single telephone line. In order to distinguish which number
the call was addressed to, a different ring pattern must be assigned for each number.
Example: Using three phone numbers
Telephone number
Ring pattern
Use
012 1234
Standard ring
Personal
012 5678
Double ring
Business
012 9876
Triple ring
Fax
100
10. Other Useful Features