Panasonic KXMB2178HK Guida Al Funzionamento

CLASS 1 LASER PRODUCT

R The printer of this unit utilises a laser. Use of

controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.

Laser diode properties
Laser output : Max. 10 mW
Wavelength : 760 nm - 800 nm
Emission duration : Continuous

CLASS 1 LED PRODUCT

R When using the unit, do not look directly at the

CIS’s LED light. Direct eye exposure can cause
eye damage.

CIS’s LED light properties
LED radiation output : Max. 1 mW
Wavelength :
 

Red : 624 nm typical

 

Green : 525 nm typical

 

Blue : 470 nm typical

Emission duration : Continuous

R During or immediately after printing, near the

recording paper exit roller shaft (A) and fuser unit
(B) gets hot. This is normal. Do not touch it.

C

B

Note:
R The area near the rear cover (C) may also get warm.

This is normal.

Toner cartridge and drum cartridge
R When replacing the toner cartridge or drum cartridge,

do not allow dust, water, or liquids to come in contact
with the drum. This may affect print quality.

R Genuine Panasonic toner cartridges and drum

cartridges are recommended.

R It is recommended not to add non-genuine toner to

the unit (including toner cartridge, drum cartridge
etc.).

R We cannot be responsible for problems that may be

caused by a non-Panasonic toner cartridge or drum
cartridge:
– Damage to the unit
– Poor print quality
– Improper operation

R Do not leave the toner cartridge out of the protective

bag for a long time. It will affect the printing quality.

R The drum cartridge contains a photosensitive drum.

Exposing it to light may damage the drum.
– Do not expose the drum cartridge to light for more

than 5 minutes.

– Do not touch or scratch the drum surface (A).

– Do not place the drum cartridge near dust or dirt,

or in a high humidity area.

– Do not expose the drum cartridge to direct

sunlight.

6