Panasonic DPMB300EU Guida Al Funzionamento
10. Help
81
10.3.2 Printing problems
I forgot the password for
feature programming via
remote operation.
feature programming via
remote operation.
L
You may have changed the feature programming password. If you do not
remember it, assign a new password using feature #155 (page 56). When
required to enter the current password, enter “
remember it, assign a new password using feature #155 (page 56). When
required to enter the current password, enter “
0101” instead.
Problem
Cause & Solution
The printing quality is poor
(e.g. has smudges, blurred
points or lines).
(e.g. has smudges, blurred
points or lines).
L
Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
turning the recording paper over.
L
You may have used paper with a cotton and/or fibre content that is over
20 %, such as letterhead or resume paper.
20 %, such as letterhead or resume paper.
L
The recording paper is too damp. Use new paper.
I changed the recording
paper, but the printing quality
is still poor.
paper, but the printing quality
is still poor.
L
The glass or rollers are dirty with correction fluid, etc. Clean them (page 96,
97). Please do not insert a document before correction fluid has dried
completely.
97). Please do not insert a document before correction fluid has dried
completely.
L
The toner save mode of feature #482 is ON (page 57).
L
The remaining toner is low. Replace the toner cartridge.
L
To check the drum life and quality, please print the printer test list (page 98).
If printing quality is still poor, replace the toner cartridge and drum cartridge.
If printing quality is still poor, replace the toner cartridge and drum cartridge.
A blank sheet is ejected.
L
You placed the document facing the wrong way when using the copier.
L
The other party placed the document in their fax machine the wrong way.
Check with the other party.
Check with the other party.
Coloured text is printed in
black instead of greyscale
when printing from Microsoft
PowerPoint or other
applications.
black instead of greyscale
when printing from Microsoft
PowerPoint or other
applications.
L
Select [Color] or remove the check next to [Grayscale] in the print
dialogue so that coloured text will be printed in greyscale.
dialogue so that coloured text will be printed in greyscale.
When using the unit as a
printer, the printing result is
distorted.
printer, the printing result is
distorted.
L
Your unit is connected to the computer by USB. After cancelling printing
using your computer, you must wait for 60 seconds before re-printing to
avoid distorted printing.
using your computer, you must wait for 60 seconds before re-printing to
avoid distorted printing.
Problem
Cause & Solution
A B C