Panasonic KX-MC6020 Guida Al Funzionamento
1. Introduction and Installation
12
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Document Requirements
1.7 Setting the original
1.7.1 Using the scanner glass
1
Open the document cover (
1).
2
Place the document FACE DOWN on the scanner
glass (
glass (
2), aligning the top left of the document with
the corner to which the m mark points.
3
Close the document cover.
1.7.2 Using the automatic document feeder
1
Insert the document (up to 50 pages) FACE UP into
the feeder until a single beep is heard.
the feeder until a single beep is heard.
2
Adjust the width of the document guides (
1) to fit
the actual size of the document.
Help
1.8 Help function
The unit contains helpful information, which can be
printed for reference.
–
printed for reference.
–
“
BASIC SETTINGS”
–
“
FEATURE LIST”
–
“
DIRECTORY”
–
“
FAX SND/RCV”
–
“
COPIER”
–
“
Q and A”
–
“
ERRORS”
–
“
REPORTS”
–
“
CALLER ID”
1
Press {Menu} repeatedly to display “
HELP”.
2
Press {<} or {>} repeatedly to display the desired
item. i {Set}
item. i {Set}
3
Press {Menu} to exit.
Volume
1.9 Adjusting the volume
Important:
L
Before adjusting the volume, set the operation
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
Ringer volume
While the unit is idle, press {V} or {^}.
While the unit is idle, press {V} or {^}.
L
The ringer volume can only be adjusted if there are
no documents in the document entrance.
no documents in the document entrance.
To turn the ringer OFF
Press {V} repeatedly to display “
Press {V} repeatedly to display “
RINGER OFF= OK?”.
i {Set}
L
The unit will not ring.
L
To turn the ringer back ON, press {^}.
Monitor volume
While using the monitor, press {V} or {^}.
While using the monitor, press {V} or {^}.
Initial Programming
1.10 Date and time
1
{
Menu} i {#}{1}{0}{1} i {Set}
M:
|
01/D:01/Y:08
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2008 10:15 PM (12 hour
clock format)
selecting 2 digits for each.
Example: August 10, 2008 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{8} {1}{0} {1}{5}.
M:
|
08/D:10/Y:08
TIME: 10:15AM
2. Press {*} repeatedly to select “
PM”.
3
{
Set}
4
Press {Menu} to exit.
2
1
1
MC6020-PNQW1048XB-QRG-en.book Page 12 Monday, February 2, 2009 11:26 AM