Panasonic KX-FP205 Guida Al Funzionamento
7. Programmable Features
34
Changing the fax
activation code
activation code
{#}{
4}{1}
If you wish to use an extension telephone (page 24) to receive
faxes, activate this feature and program the activation code.
{
faxes, activate this feature and program the activation code.
{
0} “
OFF”
{
1} “
ON” (default)
1. {MENU} i {#}{4}{1}
2. Press {1} to select “
ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
L
The default code is “;
#9”.
4. {SET} i {MENU}
Setting the memory
reception alert
reception alert
{#}{
4}{4}
To alert you with a beeping sound when a received fax document
is stored into memory due to some existing problem.
{
is stored into memory due to some existing problem.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
problem and make sure the unit is supplied with enough paper
to print the stored document.
Setting friendly
reception
reception
{#}{
4}{6}
To receive a fax automatically when you answer a call and hear a
fax calling tone (slow beep).
{
fax calling tone (slow beep).
{
0} “
OFF”: You have to press {FAX START} for fax reception.
{
1} “
ON” (default): You do not have to press {FAX START} for fax
reception.
Setting flash time
{#}{
7}{2}
The flash time depends on your telephone exchange or host PBX.
{
{
1} “
700ms” (default)
{
2} “
600ms”
{
3} “
400ms”
{
4} “
300ms”
{
5} “
250ms”
{
6} “
110ms”
{
7} “
100ms”
{
8} “
90ms”
Note:
L
If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Setting the Caller ID
number auto edit
feature
number auto edit
feature
{#}{
7}{5}
{
0} “
OFF”
{
1} “
ON” (default)
See page 18 for details.
Setting the connecting
tone
tone
{#}{
7}{6}
If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear connecting tones.
Note:
L
If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
not be a fax machine or may have run out of paper. Check with
the other party.
L
The connecting tone volume cannot be adjusted.
Feature
Feature code
Selection
FP205-PFQX2559YA-en.book Page 34 Tuesday, June 23, 2009 3:29 PM