Panasonic KXFLB813FX Guida Al Funzionamento
9. Programmable Features
64
9.3 Fax features
Feature/Code
Selection
Changing the TEL/FAX
delayed ring setting
{#}{
delayed ring setting
{#}{
2}{1}{2}
If you use an extension telephone in TEL/FAX mode, select the
desired number of times the extension telephone rings before the unit
answers the call.
{
desired number of times the extension telephone rings before the unit
answers the call.
{
1} “1”
{
2} “2” (default)
{
3} “3”
{
4} “4”
{
5} “5”
{
6} “6”
{
7} “7”
{
8} “8”
{
9} “9”
Note:
L
See page 38 for details.
Printing a sending report
{#}{
{#}{
4}{0}{1}
To print a sending report for fax transmission results (page 32).
{
{
0} “OFF”: Sending reports will not be printed.
{
1} “ON”: A sending report will be printed after every transmission.
{
2} “ERROR” (default): A sending report will be printed only when fax
transmission fails.
Setting the journal report
to print automatically
{#}{
to print automatically
{#}{
4}{0}{2}
{
0} “OFF”: The unit will not print a journal report, but will keep a record
of the last 30 fax transmissions and receptions.
{
{
1} “ON” (default): The unit will print a journal report automatically
after every 30 new fax transmissions and receptions (page 32).
Changing the receiving
mode in the manual
answer setting
{#}{
mode in the manual
answer setting
{#}{
4}{0}{4}
{
1} “TEL” (default): Telephone mode (page 38).
{
2} “TEL/FAX”: Telephone/Fax mode (page 38).
Sending documents
overseas
{#}{
overseas
{#}{
4}{1}{1}
If you cannot send a fax overseas even if the number is correct and the
line is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission
speed.
{
line is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission
speed.
{
0} “OFF”: Deactivates this feature.
{
1} “NEXT FAX”: This setting is effective only for the next attempted
fax transmission. After transmission, the unit will return to the previous
setting.
{
setting.
{
2} “ERROR” (default): When the previous fax transmission fails and
you wish to re-send the document.
Note:
L
This feature is not available for broadcast transmission.
L
Calling charges may be higher than usual.
FLB803_813FX-PFQX2567ZA-en.book Page 64 Thursday, March 30, 2006 3:25 PM