Panasonic PT-AE2000E Guida Al Funzionamento

Q

Return to the COLOUR MANAGEMENT menu 
and save the stored log as a profile. Make sure 
that the PICTURE MODE is not switched.

1. Select the PROFILE SAVE menu and press 

 

The PROFILE SAVE menu is displayed. You can 
save the profile as USER1, USER2 and USER3.

2. Press ENTER to save the profile

 

The confirmation screen is displayed. Press ENTER 
again to save.

3. Use F G I H to specify the location of the 

required character to enter and press the ENTER 
button.

 

You can enter up to 14 characters.

4. Repeat step 3 until you finish the text line.

 

Move cursor to ALL DELETE and press the ENTER 
button to delete all the entered text line.

 

Press the DEFAULT button to delete the last entered 
character or indicated with cursor in the text box.

 

To insert a character in the entered text line, move 
the cursor to the text box to select the required place 
and press G then perform step 4.

5. Select OK and press the ENTER button to set the 

entered text as a name.

 

Press the ENTER button without entering any text to 
keep the default name.

Q

You can delete the profiles from PROFILE 
DELETE menu.

1. Select PROFILE DELETE and press the ENTER 

button.

2. Select the required profile or ALL DELETE and 

press the ENTER button.

 

The confirmation screen will be displayed and select 
OK.

3. Press the ENTER button.

Q

You can change the name of the profiles from the 
PROFILE NAME CHANGE menu.

1. Select PROFILE NAME CHANGE and press the 

ENTER button.

2. Select the required profile and press the ENTER 

button.

3. Use F G I H to specify the location of the 

required character to enter and press the ENTER 
button.

4. Select OK and press the ENTER button to set the 

entered text as a name.

Q

When profiles are loaded under the PICTURE 
MODE setting, you can keep them as you defined 
until the PROFILE is set to NORMAL.

1. Select the required PICTURE MODE and press 

ENTER.

2. Press the COLOR MANAGEMENT button and 

select the PROFILE menu.

 

The profile settings of the selected PICTURE MODE 
will be displayed.

3. Select the required profile and press ENTER.

USER3

USER2

USER1

OK

CANCEL

ALL DELETE

PROFILE NAME INPUT

Return to the default setting of the 
PICTURE MODE menu.

Defined profile settings.

• LOG and PROFILE SAVE are not displayed before 

you apply COLOUR MANAGEMENT.

• If you load a profile with a different attribute mode of 

the profile, the CURSOR and PROFILE SAVE 
menus will not be displayed.

• The approximate colours will be adjusted at the 

same time. If you adjust the exact same colour 
differently, both colours will affect each other and you 
might get unexpected results.

• White, Black and Grey are not adjustable.
• If you escape the COLOUR MANAGEMENT menu 

or attempt to perform another menu action before 
you save the adjusted profile, the confirmation 
screen will be displayed.

• If you switch the input signal before you save the 

profile, the setting will be cancelled without notice.