Panasonic pv-dr2714 Guida Al Funzionamento

• When    appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by 

the unit or the disc.

•  VCR REC button is nonfunctional during DVD playback search and 

during Chase playback.

DUBBING
 
                VCR←DVD
                 EP  XP

Sub Display

•  Insert a disc containing programs to be dubbed.
•  Select Audio mode. (See page 54.)

•  Insert a cassette with record tab intact.
•  Make sure there is enough tape remaining

You can specify the position to start transfer (dubbing) of the 

program recorded on the disc*

1

 to the tape.

In One-Touch Dubbing, all contents on the disc are automatically 

dubbed onto the tapes.

*

1

 Available discs for transfer (dubbing) onto tape are DVD-RAM and non-

finalized DVD-R. Most DVD videos cannot be dubbed because they are 
copy-guarded.

„

Press STOP.
• When playback (source) side ends and unit enters Stop mode, 

or, if dubbing is stopped due to an error, a message will briefly 

appear.

„

• Turning unit ON/OFF by pressing POWER.
• Stopping transfer (dubbing) by pressing STOP.
• Selecting input mode by pressing INPUT.
• Changing channels.

-

 During dubbing, you can select and watch TV stations using 

NUMBER keys and Channel ▲▼ keys. To switch back to the 
dubbing picture, press DVD or VCR. If it is the dubbing picture, CH is 
not displayed.

•  While Manual Dubbing (DVD → Tape) is activated, timer recording 

cannot be started.

•  When the transfer (dubbing) is not started or not executed, the 

“DUBBING” indicator blinks for about 7 seconds. Check if the unit is 
properly prepared.