Panasonic ICX Manuale
Section 700 - Operation
Chapter 6. DSLT Features
ICX-45-700
ICX (International) issued June 2000
257
*
Indicates that the digits that follow are either a feature access code or an extension
number. (Not needed if your System is set for Intercom Level.) See Note below.
number. (Not needed if your System is set for Intercom Level.) See Note below.
**
Indicates that the digits that follow are for an outside number and the System should
seize the next available trunk when dialling. (Not needed if your System is set for Trunk
Level.) See Note below.
seize the next available trunk when dialling. (Not needed if your System is set for Trunk
Level.) See Note below.
Note:
The System has two levels - Trunk Level and Intercom Level. If set at Trunk Level
(default), you must enter the code for Intercom Level when programming a feature access code
or extension number for speed dialling. If the System is set at Intercom Level, you must enter the
MCO Code when programming an outside number for speed dialling.
or extension number for speed dialling. If the System is set at Intercom Level, you must enter the
MCO Code when programming an outside number for speed dialling.
System Speed Dial
You can store frequently called numbers using the SSD feature. Either 80 or 800 SSD numbers can be
programmed, depending on how the System is configured. In an 80 SSD-number system, the SSD
numbers are stored in bins 00-79. In 800 SSD-number systems, the SSD numbers are stored in bins
000-799.
programmed, depending on how the System is configured. In an 80 SSD-number system, the SSD
numbers are stored in bins 00-79. In 800 SSD-number systems, the SSD numbers are stored in bins
000-799.
Operation
To assign SSD numbers:
To dial an SSD number by entering the speed dial bin number:
SSD Code
MEMORY
NN(N)
NN(N)
Hyphen (-)
PROG
DTMF Conversion After the
Other Party Answers
Other Party Answers
MEMORY * 3
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the SSD bin number (00-79 or 000-799).
4. Dial the phone number.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. If necessary, access an outside line.
Outside dial tone
To indicate . . .
Enter/Press