eWON Flexy Extension Modules (C1D2) Guida Specifiche
Flexy Serie100/200
Flexy are available in two series. The Serie 100 doesn’t provide routing
capability between the LAN and the WAN interface and the Ethernet
to serial gateway. The Flexy Serie 100 has been designed for Remote
Data Collection application. The Serie 200 provides full features
Ethernet to Serial Gateways
MODBUS TCP to MODBUS RTU; XIP to UNITELWAY; EtherNet/IP™ to DF1; FINS
TCP to FINS Hostlink; ISO TCP to PPI, MPI (S7) or PROFIBUS (S7); VCOM to ASCII.
(Applicable to the serie 200)
Data Acquisition Protocols
MODBUS/RTU, MODBUS/TCP, Unitelway, DF1, PPI, MPI (S7), PROFIBUS (S7),
FINS Hostlink, FINS TCP, EtherNet/IP™, ISO TCP, Mitsubishi FX, Hitachi EH,
ASCII. Stored in 2500 internal tags
Alarms
Alarms notification by email, SMS, FTP put and/or SNMP traps.
4 Thresholds : low, lowlow, high, highhigh + deadband and activation
delay.
Alarm logs in http and via FTP, Alarm cycle: ALM, RTN, ACK and END
Datalogging
Internal data base for data logging (real-time logging and historical
logging up to 1,000,000 timestamps). Retrieval of the database with files
transferred by FTP or email
SD card reader
yes, for Ordinary Location
Router
IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP
client. (Applicable to the serie 200)
VPN Tunnelling
Open VPN 2.0 either in SSL UDP or HTTPS
VPN Security
The VPN security model is based on using SSL/TLS for session
authentication and the IPSec ESP protocol for secure tunnel transport
over UDP. It supports the X509 PKI (public key infrastructure) for
session authentication, the TLS protocol for key exchange, the
cipher-independent EVP (DES, 3DES, AES, BF) interface for encrypting
tunnel data, and the HMAC-SHA1 algorithm for authenticating tunnel
data.
Programmable
Script interpreter for Basic language, embedded Java 2 Micro Edition
environment
Synchronization
Embedded real-time clock, manual setup via http or automatic via NTP
File Management
FTP client and server for configuration, firmware update and data transfer
Website
Embedded web interface with setup wizards for configuration and
maintenance (no extra software needed). Basic authentication
(login/password) and session control for security.
Possibility of uploading custom web GUI. Compatible with viewON3
web HMI.
web HMI.
User Flash Disk
up to 30MB available for user application
Maintenance
SNMP V1 with MIB2 and/or via FTP files
Mechanicals
Din Rail Mounting
Dimensions: 80 x 89 x 134 mm (H x D x W );
Weight: < 500 g
Power supply
12 - 24VDC +/-20%, LPS
Consumption: depending on the extension card installed (see
Installation guide on our website)
Input/output
2x digital input: 0 to 12/24VDC; 1.5kV isolation
1x digital output: open drain (MOSFET) 200mA; 1.5 kV isolation
FLEXY BASE MODULE
GENERAL FEATURES