Moxa IEX-402-VDSL2-T Ethernet Extender Guida Specifiche
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Ethernet Solutions
Console Port: RS-232 (RJ45 connector)
Button: Reset button
Button: Reset button
Power Requirements
Input Voltage: 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
Input Current: 0.33A @ 24V
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal block
Reverse Polarity Protection: Present
Input Current: 0.33A @ 24V
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal block
Reverse Polarity Protection: Present
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions:
35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in)
Weight: 275 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Altitude: Up to 2000 m
Dimensions:
35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in)
Weight: 275 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Altitude: Up to 2000 m
Note: Contact Moxa for products guaranteed to function at higher altitudes.
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
IEX-402-VDSL2 Series
Introduction
The IEX-402-VDSL2 is an industrial managed Ethernet extender for
extending up to 3 km of LAN segments over twisted-pair copper
wires at data rates of up to 100 Mbps using the VDSL2 standard. The
Ethernet extender is designed with one 10/100BaseT(X) and one DSL
port. It is the perfect solution to extend copper cable networks beyond
conventional Ethernet limitations by using existing twisted-pair copper
wires to reduce new network cable installation costs.
extending up to 3 km of LAN segments over twisted-pair copper
wires at data rates of up to 100 Mbps using the VDSL2 standard. The
Ethernet extender is designed with one 10/100BaseT(X) and one DSL
port. It is the perfect solution to extend copper cable networks beyond
conventional Ethernet limitations by using existing twisted-pair copper
wires to reduce new network cable installation costs.
The IEX-402-VDSL2 series is designed for use in harsh operating
environments. The DIN-rail mount, wide operating temperature range
(-40 to 75°C), and dual power input make it ideal for installation in
environments. The DIN-rail mount, wide operating temperature range
(-40 to 75°C), and dual power input make it ideal for installation in
• Automatic CO/CPE negotiation reduces configuration time
• Standard VDSL2 data rate up to 100 Mbps, with up to 3 km
transmission distance (performance varies with line conditions)
• Supports Link Fault Pass-Through(LFP)
• Supports SNMP v1/v2c/v3 for different levels of network
management
• Interoperable with Turbo Ring/Turbo Chain network redundancy
Specifications
Managed VDSL2 Ethernet extender
industrial applications.
To simplify configuration, the IEX-402-VDSL2 uses CO/CPE automatic
negotiation (factory default setting). The device will automatically
assign CPE status to one of each pair of IEX devices. In addition,
advanced management and monitoring functionalities through NMS,
including a virtual panel, improve the user experience for quick
troubleshooting.
negotiation (factory default setting). The device will automatically
assign CPE status to one of each pair of IEX devices. In addition,
advanced management and monitoring functionalities through NMS,
including a virtual panel, improve the user experience for quick
troubleshooting.
• Support Modbus/TCP protocol for device management and
monitoring
• Compatible with EtherNet/IP and PROFINET protocols for
transparent transmission
• Easy network management through web browser, Telnet/Serial
console, Windows utility, MXview, and ABC-01
• IPv6 Ready
Features and Benefits
›
High-speed connections - up to 100 Mbps over twisted-pair
copper wires
›
Automatic CO/CPE negotiation reduces configuration time
›
Link Fault Pass-through (LFP) support
›
Link quality indicators for simple troubleshooting
›
Easy network management by web browser, Telnet/serial
console, Windows utility, ABC-01, and Mxview
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1p for Class of Service
ITU G.993.2 for very high speed digital subscriber line transceivers 2
Protocols: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet,
Syslog, LLDP, Modbus/TCP
MIB: MIB-II
Flow Control: IEEE 802.3x flow control, back pressure flow control
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1p for Class of Service
ITU G.993.2 for very high speed digital subscriber line transceivers 2
Protocols: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet,
Syslog, LLDP, Modbus/TCP
MIB: MIB-II
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
MAC Table Size: 1K
Packet Buffer Size: 512K
Packet Buffer Size: 512K
Interface
DSL Port: DSL Port: RJ-11(RJ-45 connector) or detachable 2-contact
terminal block
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
DIP Switches: CO/CPE, SNR/SPEED, STD/INP
LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE,
10/100 (TP port)
terminal block
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
DIP Switches: CO/CPE, SNR/SPEED, STD/INP
LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE,
10/100 (TP port)