ADDER X-DVIPRO-MS2-US Extender Guida Specifiche
KVM Extender
Solutions
Experts in
Connectivity
Solutions
DVI & USB EXTENDER
Second generation extender to transmit
Dual head DVI video as well as
transparent USB over CATx cable
FEATURES
Full single link DVI extender
The ADDERLink X-DVI PRO-MS
extender is designed to deliver two single
link DVI digital video resolutions up to
165 MPixels per second. 165MPixels per
second is the maximum data rate available
on single link DVI connections, and is
achieved without the need to compress
data in any way. Resolutions supported by
single link DVI range from 640 x 480 @
60 Hz (25 MPixels/s) through to 3840 x
2400 @ 17Hz (164 MPixels/s).
HDMI 1.3a operation
By using HDMI to DVI converter cables,
the ADDERLink X-DVI PRO-MS can
support HDMI Video and Audio up to the
165MHz clock rate (1920 x1080 @60Hz
24bit color) 8 channels of HDMI audio
is supported with sample sizes of 16,
20 or 24 bit at 32KHz, 44.1kHz, 48kHz,
88.2kHz, 96kHz, 176.4kHz, or 192kHz
(simultaneously with the jack audio).
It does not support HDCP or CEC
control.
CD quality audio extention
Two audio extention ports (stereo
channel 16 bit audio ports sampled at
44.1KHz -CD quality) are available to
transfer audio from local to remote for a
line out / headphone use case.
USB 2.0 transparent connection
Delivers bidirectional USB 2.0 (low speed
/ full speed) data allowing you to extend
any USB device up to 50 meters over the
same CATx cables.
This makes the X-DVI PRO perfect for
distributed workstations where you want
to reduce environmental concerns such
as heat and noise. A typical example of
this would be post production suites.
By centralising your workstations, you
can also extend operational life-span by
ensuring optimal temperature control, and
minimal physical disturbance.
CATx distribution
ADDERLink X-DVI PRO-MS requires one
CATx (CAT7a recommended) cable per
video head. The X-DVI PRO-MS delivers
video alongside USB data and audio over a
single CATx cable. Dependent upon cable
type, quality and connections distances
may vary. See Technical specification for
detailed rules.
The extended profile DDC EDID data
from the display is captured to ensure
that your system is configured to deliver
optimal video performance.
Intelligent cable modelling
The X-DVI PRO-MS has been designed to
be used in many different environments
across many different types and makes
of cable. To ensure the quality of your
DVI signal is always optimal, Adder have
modelled a broad range of cables and
integrated these models into the X-DVI
PRO-MS. As a result, the user has greater
flexibility over the CATx connection,
allowing you to make use of existing
CATx infrastructure.
PRODUCT IN BRIEF
The ADDERLink X-DVI PRO-MS is
Adder’s second generation extender
to transmit two DVI video streams or
two HDMI streams, Audio, USB 2.0 and
two HDMI streams, Audio, USB 2.0 and
audio over CATx cable.
The ADDERLink X-DVI PRO-MS
allows users to extend control of any
computer with multiple screen outputs
and USB 2.0 over distances up to 50
meters with resolutions up to 165
meters with resolutions up to 165
MPixels per second (e.g. 1920x1200 @
60Hz or 3840 x 2400 @ 17Hz).
In operation, the X-DVI PRO-MS is
truly plug and play, capturing full EDID
truly plug and play, capturing full EDID
data from the screen ensuring your
hardware is always setup to deliver
hardware is always setup to deliver
optimal display performance.
ADDERLINK X-DVI PRO MS
Two single link DVI or two HDMI 1.3a video streams, transparent USB and audio
over CATx cables
over CATx cables
50m
(165ft)
USB
DVI-D
USB
DDC EDID