Mobotix MX-S15D-Sec Camera Guida Specifiche

Technical data - Thermal sensor modules for S15

Model versions

Thermal Sensor Modules and PTMount-Thermal

lens options for thermal image sensor

L43: 45°, L65: 25°, L135: 17° (horizontal image angle)

Sensitivity - thermal image sensor

NETD typically 50 mK (equivalent to 0.05°C/0.09°F), < 79 mK

Image sensor for thermal image sensor

Uncooled microbolometer with 336 x 252 pixels

Temperature measurement range

-40 to 550 °C/-40 to 1022 °F (temperature of objects to be detected)

Spectral range

7.5 to 13.5 μm

Maximum image size for thermal
image sensor

Scalable up to 3072 x 2048 (6MP), automatically scaled to the image size of the MX
sensor module with dual images

Maximum frame rate for thermal
image sensor

9 fps (the camera’s overall frame rate is reduced to a maximum of 9 fps when an MX
sensor module and a thermal image sensor are displayed simultaneously)

Software functions for thermal image
sensor (certain features only available
with firmware version 4.2.1.43 and
higher)

Optional oﬀ-color or black and white image, image mirroring, obscure image area, PTZ
commands (pan, tilt, zoom), text and logo options, show event/action symbols, level
displays in bars or diagrams, temperature control window

Power consumption for S15D with one/
two thermal sensor module(s)

Typically 1.5 W per thermal sensor module; however, can only be used together with an
S15 camera housing (versions A to C):
A. Mixed operation (1 x thermal, 1 x optical): typically 6.5 W

(7.5 W possible over the short term)

B. Dual thermal operation (2 x thermal): typically 7 W (8 W possible over the short term)
C. Single thermal operation (1 x thermal): typically 5.5 W (6.5 W possible over the short term)

Operating conditions

IP66, -30 to +60°C/-22 to 140°F

Material

Module housing: black anodized aluminum; pressure plate: V2A stainless steel; lens and
protective glass lens: germanium

Weight / length / installation
dimensions Thermal sensor modules

Weight: < 330 g (one thermal sensor module without sensor cable); total length: 78 mm;
diameter of front panel: 57 mm; diameter of stainless steel pressure plate: 63 mm; bore
diameter: 48 – 53 mm; maximum wall thickness for installation: 14 mm; alternative
mounting with six screw threads on the side of the module for M4 screws, 4 mm thread
depth

Delivered parts

Thermal sensor module, 3 mm Allen wrench used to install the pressure plate, Quick
Install guide - the S15 camera housing (Body) and sensor cables must be ordered
separately!

NOTE: An S15 with one or two thermal sensor modules always requires PoE class 3 (factory default).

Attention – Special Export Regulations For Thermal Cameras Apply!

Cameras with thermographic image sensors (“thermal cameras”) are subject to the special export regulations of the
U.S.A. and the ITAR (International Traﬃc in Arms Regulation):

•  According  to  the  currently  applicable  export  regulations  of  the  U.S.A.  and  the  ITAR,  cameras  with  thermographic  image
sensors  or  parts thereof must not be  exported to countries  embargoed by  the U.S.A. or the ITAR. At present, this  applies to  the
following  countries:  Syria,  Iran,  Cuba,  North  Korea  and Sudan.  The  same  export  ban  applies  to  all  persons  and  institutions
listed in “The Denied Persons List” (see www.bis.doc.gov, “Policy Guidance > Lists of Parties of Concern”).

• Under no circumstances can the camera itself or its thermographic image sensors be used in the design, the development
or in the production of nuclear, biological or chemical weapons or in the weapons themselves.

S15 – Technical Specification