Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY Guida Specifiche

Fan Tray

Supports one hot-swappable fan tray. These fan tray models are 
supported:

WS-C6506-E-FAN—564 CFM

You must install a 2500 W or higher capacity power supply in 
the chassis to power the fan tray. The 2500 W power supply can 
be powered from either 120 VAC or 220 VAC.

The fan tray contains six individual fans. The individual fans are 
not field replaceable. You must replace the fan tray.

Fan tray STATUS LED

Red—One or more individual fans have failed.

Green—Fan tray is operating normally.

Power Supply

Supports one or two power supplies. The following power supplies are 
supported:

WS-CAC-2500W (2500 W AC-input power supply).

WS-CDC-2500W (2500 W DC-input power supply).

WS-CAC-3000W (3000 W AC-input power supply).

WS-CAC-4000W-US (4000 W AC-input power supply).

WS-CAC-4000W-INT (4000 W AC-input power supply).

PWR-4000-DC (4000 W DC-input power supply).

WS-CAC-6000W (6000 W AC-input power supply).

Installed power supplies can be of different wattage ratings. Installed 
power supplies can also be both AC-input, both DC-input, or one 
AC-input and one DC-input. Power supplies can be configured in either 
redundant or non-redundant mode.

All Catalyst 6500 series AC-input power supplies require single-phase 
source AC. Source AC can be out of phase between multiple power 
supplies or multiple AC-power plugs on the same power supply because 
all AC power supply inputs are isolated.

Single power supplies are installed in the left power supply bay. The 
second power supply is installed in the right power supply bay.