Manualsbrain.com
  1. Manuali
  2. Marche
  3. Kenwood
  4. DNX874S
  5. Manuale Proprietario

Kenwood DNX874S Manuale Proprietario

Scarica
Pagina di 133
USB/SD card
26
USB/SD card
Connecting a USB device
1 
Connect the USB device with the USB 
cable. (P.94)
2 
Press the [HOME] button.
3 
Touch 
.
4 
Touch [USB]. (P.12)
 
Ñ
Disconnect the USB device
1 
Press the [HOME] button.
2 
Touch a source other than [USB]. 
3 
Detach the USB device.
 
Ñ
Usable USB device
You can use a mass-storage-class USB device on 
this unit. 
The word “USB device” appearing in this manual 
indicates a flash memory device.
 
●
About file system
The file system should be the one of the 
following.
• FAT16
• FAT32
• exFAT
• NTFS
NOTE
•  Install the USB device in the place where it will 
not affect safe driving.
•  You cannot connect a USB device via a USB hub 
and Multi Card Reader.
•  Take backups of the audio files used with this 
unit. The files can be erased depending on the 
operating conditions of the USB device.
We shall have no compensation for any damage 
arising from any erased data.
Inserting the SD card
1 
Press the [
G] button.
2 
Touch [OPEN] to the panel fully opens.
3 
Insert the SD card into the slot until it 
clicks.
4 
Press the [
G] button.
5 
Press the [HOME] button.
6 
Touch 
.
7 
Touch [SD]. (P.12)
 
Ñ
Remove the SD card
1 
Press the [
G] button.
2 
Touch [OPEN] to the panel fully opens.
3 
Push the SD card until it clicks and then 
remove your finger from the card. The 
card pops up so that you can pull it out 
with your fingers.
4 
Press the [
G] button.
 
Ñ
Usable SD card.
The unit is capable of playback of SD/SDHC/
SDXC memory cards complying with the SD, 
SDHC or SDXC standard. A special adapter is 
required to use a miniSD card, miniSDHC card, 
microSD card, microSDHC, or microSDXC card.
The MultiMedia Card (MMC) cannot be used.