Sensaphone Sentinel SCD-1200 Manuale Proprietario
17
Chapter 2: set up
The device table will display all devices on your account. Click on the Details button to display and con-
figure the zones for that device. You can also use the search box above the table to search through the
table, or click on the table column headers to sort the data.
figure the zones for that device. You can also use the search box above the table to search through the
table, or click on the table column headers to sort the data.
Device Name – The name of the device
Status – The current status of the device (Okay, Alarms, Offline, or Standby) If the device has any
unacknowledged alarms, a symbol will be displayed in this column
unacknowledged alarms, a symbol will be displayed in this column
Power – Displays if the device is On or Off (--- will display if the device is offline)
Battery – The current percentage of the device battery (--- will display if the device is offline)
Last Response – The time that the device last connected to the server
Alarm Acknowledgment
Alarms can be acknowledged from the dashboard page by selecting a device using the checkboxes next
to each device, and then clicking the “Action” drop-down at the top of the screen. You can acknowledge
both Device Offline alarms or Zone alarms. Devices with ‘Unacknowledged’ alarms are identified with
an exclamation point within a triangle. Once the alarm is acknowledged this symbol will disappear. You
can acknowledge multiple alarms on multiple devices at the same time. Alarms can also be acknowledged
during telephone calls by entering 555 when prompted to enter the acknowledgment code, or by simply
replying to alarm messages sent via email.
to each device, and then clicking the “Action” drop-down at the top of the screen. You can acknowledge
both Device Offline alarms or Zone alarms. Devices with ‘Unacknowledged’ alarms are identified with
an exclamation point within a triangle. Once the alarm is acknowledged this symbol will disappear. You
can acknowledge multiple alarms on multiple devices at the same time. Alarms can also be acknowledged
during telephone calls by entering 555 when prompted to enter the acknowledgment code, or by simply
replying to alarm messages sent via email.
Standby Mode
Standby mode puts the Sentinel in a temporary state such that no alarms will be detected, allowing
onsite personnel to perform maintenance or other tasks that may have triggered an alarm otherwise.
Standby mode can be entered using the Action drop down on the Dashboard page or via the pushbut-
ton on the front of the unit. Standby mode will persist for the duration of time entered on the Device
Configure screen and will automatically exit once the time expires. When using the pushbutton you
must depress the button for 5 seconds. The Standby LED will light up to indicate that the device is in
Standby mode. You can also exit Standby mode using the same methods.
onsite personnel to perform maintenance or other tasks that may have triggered an alarm otherwise.
Standby mode can be entered using the Action drop down on the Dashboard page or via the pushbut-
ton on the front of the unit. Standby mode will persist for the duration of time entered on the Device
Configure screen and will automatically exit once the time expires. When using the pushbutton you
must depress the button for 5 seconds. The Standby LED will light up to indicate that the device is in
Standby mode. You can also exit Standby mode using the same methods.
Standby – Allows you to put the selected devices into Standby mode
Enter – Put the Sentinel in Standby mode for the length of time that is set on the Device Configure
page
page
Enter (Untimed) – Put the Sentinel in Standby mode until you disable it
Exit – Take the device out of Standby mode