BOSS BV765BLC Manuale Proprietario

 

 
Tap Wallpaper button to setup wallpaper 

Tap Panel Adjust button to setup panel touch  

Tap time setting button to setup time                                  Tap SWC item to program SWC 

                                     

1) First check whether the car has steering wheel button.
2) The steering wheel and the unit must be connected on the line. 
3) While holding down the button on the steering wheel and the corresponding button on the SWC 
interface it will display complete setting. When all the buttons on the steering wheel and the 
corresponding button on the SWC interface complete setting, you can use the steering wheel button to 
operation the unit, such as in radio mode, press 

button or 

button to search station backward or 

forward; In DVD mode, press   button  or   button to select the previous or next track and activate 
fast reverse (REW) search or fast forward in a track, press VOL+ button or VOL - button to adjust the 
volume.
Note:
1. The “Enter” button and the “reset” button are not included in steering wheel, press the “enter” 
button to confirm the select, press the “reset” button to clear the former select. 

2. The restriction of use SWC is the voltage between the adjacent buttons are above 0.2V that can be 
identified. 
DVD Setup Menu 

13

Tap center of the   

and hold at least 2S, after 

tap  five  point, 

then it will show OK in the 

picture. and press OK exit calibration mode.     

Audio Language   : select desired language 

Subtitle Language :select desired language 

Menu Language   :select desired language 
Password

Rating

There are 3 wires for  
SWC function, connect   
to SWC1 (white), SWC2  
(Brown), GND (Black)