Sony RSX-GS9 Manuale Proprietario

High level input connection

For details on the connection, refer to the manual
supplied with your audio device.

Optical connection

 This OPTICAL OUT is designed for connecting a

power amplifier with an optical input. When
another digital device is connected, the functions
of the device may not work properly.

 When making connections, do not bend the

optical cable (not supplied). Doing so may
prevent output of sound.

 When the optical connection is made:

 set [Optical Out] to [48kHz] or [96kHz] to

enable.

 the volume controls on the unit and the remote

commander do not work.

 [Subwoofer], [Pos Custom], [Pos Preset], [EQ10

Preset], [Balance], [Fader], [Loudness] and
[DSEE HX] are automatically set to [OFF].

 No sound is output while native DSD playback

is performed via the USB micro-B port.

Power amplifier connection

Stop using the unit and the power amplifier that is
not supported a High-Resolution Audio, when
unusual noise is generated.

Memory hold connection

When the yellow power supply lead is connected,
power will always be supplied to the memory
circuit even when the ignition switch is turned off.

To capture your voice during handsfree calling, you
need to install the microphone

.

Cautions

 It is extremely dangerous if the cord becomes

wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.

 If airbags or any other shock-absorbing

equipment is in your car, contact the store where
you purchased this unit, or the car dealer, before
installation.

Note
Before attaching the double-sided tape

, clean the

surface of the dashboard with a dry cloth.

White



White/black striped

Gray

Gray/black striped

Left speaker
output

Right speaker
output

Audio device with
speaker outputs

Installing the microphone





Clip (not supplied)

