JVC KD-R880BT Manuale Proprietario
ENGLISH
16
To
On the faceplate
On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
call and hold the current
call
Press
or the volume
knob.
( Not available )
Reject another incoming
call
call
Press and hold
or
the volume knob.
( Not available )
While having two active calls...
End current call and
activate held call
activate held call
Press and hold
or
the volume knob.
Press and hold
.
Swap between the
current call and held call
current call and held call
Press
.
( Not available )
Adjust the phone volume
[00] to [35] (Default: [15])
[00] to [35] (Default: [15])
Turn the volume knob
during a call.
• This adjustment will not
during a call.
• This adjustment will not
affect the volume of the
other sources.
other sources.
( Not available )
Switch between hands-free
and private talk modes
and private talk modes
Press
during a call.
• Operations may vary
according to the
connected Bluetooth
device.
connected Bluetooth
device.
( Not available )
Improve the voice quality
While talking on the phone....
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default: XX
MIC GAIN
LEVEL –10 to LEVEL +10 (LEVEL –4): The sensitivity of the
microphone increases as the number increased.
microphone increases as the number increased.
NR LEVEL
LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the noise reduction
level until the least noise is being heard during a phone
conversation.
level until the least noise is being heard during a phone
conversation.
ECHO CANCEL
LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the echo
cancellation delay time until the least echo is being heard
during a phone conversation.
cancellation delay time until the least echo is being heard
during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following
table), then press the knob.
table), then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
To return to the previous setting item, press
.
Default: XX
SETTINGS
AUTO ANSWER
01 SEC to 30 SEC: The unit answers incoming call
automatically in the selected time (in seconds). ; OFF: Cancels.
automatically in the selected time (in seconds). ; OFF: Cancels.
RING COLOR
(For KD-R980BTS)
COLOR 01 to COLOR 49 (COLOR 08): Selects the light color
for the buttons as notification when there is an incoming call
and during a call. ; OFF: Cancels.
COLOR 01 to COLOR 49 (COLOR 08): Selects the light color
for the buttons as notification when there is an incoming call
and during a call. ; OFF: Cancels.
RING ILLUMI
(For KD-R880BT)
BLINK 1 to BLINK 5 (BLINK 2): Selects the blinking pattern
for the buttons as notification when there is an incoming call. ;
OFF: Cancels.
BLINK 1 to BLINK 5 (BLINK 2): Selects the blinking pattern
for the buttons as notification when there is an incoming call. ;
OFF: Cancels.
BATT/SIGNAL*
AUTO: Shows the strength of the battery and signal when the
unit detects a Bluetooth device and the Bluetooth device is
connected. ; OFF: Cancels. Clock time is shown.
unit detects a Bluetooth device and the Bluetooth device is
connected. ; OFF: Cancels. Clock time is shown.
* Functionality depends on the type of the phone used.
BLUETOOTH®
JS_JVC_KD_R980BTS_K_EN_4.indd 16
20/5/2016 2:22:46 PM