Illusion Audio Electra E5 Manuale Proprietario

CARBON / ELECTRA / LUCCENT COMPONENTS       PG 06

ILLUSIONAUDIO-AMERICA.COM

1.  Check the area behind the tweeter location for loose wires, etc…

2.  Using an adjustable hole saw carefully cut a 1 11/16 “ hole for mounting the tweeter. ( the hole saw is 

available from Macmaster.com  Part number 4192a26.  Changeable end and carbide tip)

3.  Clean up the hole and press fit the tweeter in. 

4.  Connect the wires to the crossover accordingly. 

1.  A surface mounting cup is provided in the box.

2.  Place the surface mounting cup where it needs to be and screw it into place.  Mounting hardware is 

provided.

3.  Run the wires from the tweeter through the mounting cup.  Be sure you have the wires from the crossover 

available so that the tweeter wires may be attached securely.

4.  Place the tweeter into the mounting cup and snap into place.

A mounting brace is provided as well to secure the tweeter behind a panel when the hole that is cut is not 

made of a sufficient strength material that would support a standard flush mount.

Illusion Audio / Orca Design & Manufacturing supports their products and guarantees them to be free of 

manufacturing defects for a period of 1 year (non-transferrable) from the date of purchase, if purchased from an 

authorized retailer. This time period is extended to 3 years (non-transferrable) from the date of purchase, if the 

product is purchased from and installed by an authorized retailer, and no alterations are made to the installation 

or setup of the product outside of the authorized retailer.

This manufacturing warranty does not extend to situations involving physical or installation damage, misuse, 

abuse, or modification. If a product malfunctions, please return it to the authorized retailer from which the 

product was purchased to have it and/or its installation inspected and to have the warranty period verified from 

date of purchase.

The authorized dealer will then work with Illusion Audio / Orca Design & Manufacturing to obtain service, if 

necessary. If found to be a defect due to manufacturing, the item will be repaired or replaced with a refurbished 

product. The product will be returned to the authorized retailer when repairs are complete, so that the dealer can 

return the product to you, or reinstall the product to maintain the above mentioned warranty timeline.