ONKYO TX-RZ610 Manuale Proprietario
26
Rear Panel
1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV
component digital audio signals with a digital optical
cable or digital coaxial cable.
cable or digital coaxial cable.
2. TUNER AM/FM 75Ω terminal: The supplied antennas
are connected.
3. VIDEO IN jacks: Input the AV component video signals
with an analog video cable.
4. USB port: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (5V/1A) to USB devices with a USB cable.
supply power (5V/1A) to USB devices with a USB cable.
5. ETHERNET port: Connect to the network with an
Ethernet cable.
6. COMPONENT VIDEO IN jacks: Input the video signals
from AV components with a component video cable.
7. HDMI OUT jacks: Transmit video signals and audio
signals with a HDMI cable connected to a monitor such
as a TV or projector.
as a TV or projector.
8. HDMI IN jacks: Transmit video signals and audio signals
with a HDMI cable connected to an AV component.
9. Wireless antenna: Used for Wi-Fi connection or when
using a BLUETOOTH enabled device. Adjust their
angles according to the connection status.
angles according to the connection status.
10.AC INLET: The supplied power cord is connected.
11. GND terminal: The ground wire of the turntable is
11. GND terminal: The ground wire of the turntable is
connected.
12.AUDIO IN jacks: Input TV or AV component audio
signals with an analog audio cable.
13.SPEAKERS terminals: Connect speakers with speaker
cables. You can connect the multichannel speakers for
the main room and the speakers for a separate room
the main room and the speakers for a separate room
(ZONE 2). (Compatible with banana plugs)
14.ZONE 2 PRE/LINE OUT jack: Output audio signals with
an analog audio cable to a pre-main amplifier or a power
amplifier in a separate room (ZONE 2). (
amplifier in a separate room (ZONE 2). (
15.SUBWOOFER PRE OUT jack: Connect a powered
subwoofer with a subwoofer cable. Up to two powered
subwoofers can be connected. The same signal is output
from each of the SUBWOOFER PRE OUT jacks.
subwoofers can be connected. The same signal is output
from each of the SUBWOOFER PRE OUT jacks.
16.12V TRIGGER OUT jack: Allows you to connect a device
with 12V trigger input jack to enable link operation
between the device and the unit.
between the device and the unit.
17.IR IN port: Allows you to connect a multiroom remote
control kit.
18.RS232 port: For connection to the home control system.
12
11
14
13
10
9
9
8
1
2
3
5
7
6
4
15
16 17 18
180°
90°